Frigidaire 316000635 manual Oven Cleaning, Self-Cleaning Oven

Page 12

Oven Cleaning

During the self-cleaning cycle, the outside of the range can become very hot to the touch. DO NOT leave small children unattended near the appliance.

DO NOT line the oven walls, racks, bottom or any other part of the range with aluminum foil. Doing so will destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil will melt to the interior surface of the oven).

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution when opening the door after the self-cleaning cycle is completed. The oven may still be VERY HOT.

Figure 1

Figure 2

Self-Cleaning Oven

A self-cleaning oven cleans itself with high temperatures (well above cooking temperatures) which eliminate soil completely or reduce it to a fine powdered ash you can wipe away with a damp cloth.

1.Adhere to the following cleaning precautions:

Allow the oven to cool before precleaning.

Wear rubber gloves when precleaning and while wiping up the residue after the self-clean cycle.

DO NOT use oven cleaners or oven protective coatings in or around any part of the self-cleaning oven.

DO NOT clean the oven door gasket. The woven material of the oven door gasket is essential for a good seal. Care should be taken not to rub, damage or remove the gasket.

DO NOT use any cleaning materials on the oven door gasket. Doing so could cause damage.

2.Remove the broiler pan and insert, all utensils and any aluminum foil. These items cannot withstand high cleaning temperatures.

3.Oven racks may be left in the oven or may be removed. If they go through the clean cycle their color will turn slightly blue and the finish will be dull. After the cycle is complete and the oven has cooled, rub the sides of the racks with wax paper or a cloth containing a small amount of baby oil or salad oil (this will make the racks glide easier into the rack position).

4.Remove any excess spillovers in the oven cavity before starting the self-cleaning cycle. To clean, use hot, soapy water and a cloth. Large spillovers can cause heavy smoke or fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or acid content (such as milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface as they may cause a dull spot even after cleaning.

5.Clean any soil from the oven frame, the door liner outside the oven door gasket and the small area at the front center of the oven bottom. These areas heat sufficiently to burn soil on. Clean with soap and water.

12

Image 12
Contents 316000635 Contents Product RegistrationImportant Safety Instructions Important Safety Instructions Start Indicator LIGHT-Flashes as Control Pad FunctionsOven can be programmed to UP and Down ArrowSetting the Clock and Minute Timer To Set the Minute TimerPush Timer ON/OFF To Change the Minute Timer while it is in useSetting Surface Controls To Operate the Surface ElementTypical Knob Before Setting Oven Controls Oven Vent LocationArranging Oven Racks Setting Oven Controls To Set or Change the Temperature for Normal BakingTo Change the Oven Temperature after Baking has Started If the Power is Interrupted During a Bake CycleFor a Delayed Start Time and Automatic Shut-Off To Set the Automatic Timer Timed Bake Feature, OnlyWhen the Set Bake Time Runs Out To Begin Baking Immediately with an Automatic Shut-OffTo Broil Rack Position From Top FoodOven Cleaning Self-Cleaning OvenAdhere to the following cleaning precautions To Start the Self-Clean Cycle Figure When the Self-Clean Cycle is Completed FigureStopping or Interrupting a Self-Cleaning Cycle or To Set the ControlsGeneral Cleaning Cleaning Various Parts of Your RangeTo Raise the Top for Cleaning Surface Elements and Drip BowlsTo Remove and Replace Oven Door Changing Cooktop and/or Oven Lights To Change the Cooktop Light some modelsTo Change the Oven Light some models Some modelsAdjusting Oven Temperature To Adjust Oven Temperature FigureSurface element too hot or not hot enough Surface element does not heatEntire appliance does not operate Self-cleaning cycle does not work Soil not completely removed after self-cleaning cycleBroiling Poor baking resultsRange Warranty