Frigidaire 316000635 manual Setting the Clock and Minute Timer, For a silent control panel

Page 6

Setting the Clock and Minute Timer

For a silent control panel

(Figure 2 Only):

When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed for silent operation. Push and hold STOP TIME. After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pushed. To return the sound, push and hold STOP TIME again for 7 seconds until 1 beep is heard. Note: The control will return to the audible mode after a power outage.

Figure 2 Only

To Set the Clock (Figure 2 Only)

When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00".

1.Push CLOCK.

2.Within 5 seconds, push and hold the UP or DOWN ARROW until the correct time of day appears in the display.

Note: The clock cannot be changed during any timed bake or self-clean cycle.

To Set the Minute Timer

1.Push TIMER ON/OFF.

2.Push the UP ARROW to increase the time in one minute increments. Push and hold the UP ARROW to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes. Note: If you push the DOWN ARROW first, the timer will advance to 11 hours and 59 minutes.

3.The display shows the timer count down in minutes until one minute remains. Then the display will count down in seconds.

4.When the set time has run out, the timer will beep 3 times. It will then continue to beep 3 times every 60 seconds until TIMER ON/OFF is pushed.

Note: The minute timer does not start or stop cooking. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during any of the other oven functions. When the minute timer is in use with any other mode, the minute timer will be shown in the display. To view other functions, push the function pad for that mode.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, push and hold the UP or DOWN ARROW to increase or decrease the time.

To Cancel the Minute Timer before the set time has run out: Push TIMER ON/OFF.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 316000635 Contents Product RegistrationImportant Safety Instructions Important Safety Instructions Oven can be programmed to Start Indicator LIGHT-Flashes asControl Pad Functions UP and Down ArrowPush Timer ON/OFF Setting the Clock and Minute TimerTo Set the Minute Timer To Change the Minute Timer while it is in useSetting Surface Controls To Operate the Surface ElementTypical Knob Before Setting Oven Controls Oven Vent LocationArranging Oven Racks To Change the Oven Temperature after Baking has Started Setting Oven ControlsTo Set or Change the Temperature for Normal Baking If the Power is Interrupted During a Bake CycleWhen the Set Bake Time Runs Out For a Delayed Start Time and Automatic Shut-OffTo Set the Automatic Timer Timed Bake Feature, Only To Begin Baking Immediately with an Automatic Shut-OffTo Broil Rack Position From Top FoodOven Cleaning Self-Cleaning OvenAdhere to the following cleaning precautions Stopping or Interrupting a Self-Cleaning Cycle or To Start the Self-Clean Cycle FigureWhen the Self-Clean Cycle is Completed Figure To Set the ControlsGeneral Cleaning Cleaning Various Parts of Your RangeTo Raise the Top for Cleaning Surface Elements and Drip BowlsTo Remove and Replace Oven Door To Change the Oven Light some models Changing Cooktop and/or Oven LightsTo Change the Cooktop Light some models Some modelsAdjusting Oven Temperature To Adjust Oven Temperature FigureSurface element too hot or not hot enough Surface element does not heatEntire appliance does not operate Broiling Self-cleaning cycle does not workSoil not completely removed after self-cleaning cycle Poor baking resultsRange Warranty
Top Page Image Contents