DeLonghi DEGH60BG, DEGH70BG, DEGH90BG manual

Page 24

CORRECT POSITIONING OF THE AUXILIARY, SEMI-RAPID AND RA- PID BURNERS

It is very important to check that the burner flame spreader “F” and the cap “C” have been correctly positioned (see figs. 18 and 19).

■■ They shall be level and must not ro- tate.

■■ Failure to do so can cause serious pro- blems.

The pan supports shall be correctly positio- ned as indicated in fig. 20.

■■ The pan supports shall be level and must not rotate.

Only for the models DEGH70BG, DE-

GH90BG:

■■ Be sure NOT to fit the triple-ring bur- ner pan support on the auxiliary, semi- rapid or rapid burners.

■■ The triple-ring burner pan support IS ONLY to be used on the triple-ring burner.

		Figure 18
		C
		F
	Ignitor “ S”	Flame failure
	Ignitor “ S”	probe “T”
		probe “T”
	24

Figure 19

Figure 20

Image 24

Contents BUILT-IN GAS on Glass Hobs Page Dear Customer Product LabelImportant Precautions and Recommendations Installation Electrical RequirementsDEGH90BG 840 ClearancesModel DEGH60BG Installing the SEPARA- TOR below the Base of the Cooktop Standards requirementFastening the Cooktop Natural GAS GAS SupplyInstallation with a Flexible Hose Assembly Table for the Choice of the Injectors UlpgReplacing the Injectors Minimum Burner Setting Adjustment Lubricating the GAS TAPUSE and Care GAS Burners Control KnobsUsing GAS Burners Lighting GAS Burners Fitted with Flame Failure Safety Device Cooking Hints for GAS HobsWrong CorrectPage General Advice Glass SurfaceEnamelled Parts GAS TapsBurners and Grids Important WarningGH90BG Page Service and Maintenance Lubrication of the GAS TapsPage Cod ß1