SERVICE AND MAINTENANCE
If the ignition spark fails to ignite or does not light the gas, check the following items before calling our Customer Service Centre to obtain the nearest Authorised Delonghi Service Agent:
■■ Burner is reassembled and located correctly.
■■ Spark electrode and white ceramic are clean and dry. ■■ 230 or 240 VAC power supply is connected.
Contact the local gas utility or our Customer Service Centre to obtain the nearest Authori- zed Delonghi Service Agent.
■■ You can smell gas when all burners are turned on.
■■ The burners do not remain alight at the minimum marked setting.
■■ The burner flame is yellow or emits an unusual odour.
Note that a
Servicing the appliance:
Service may be obtained by contacting our Customer Service Centre to locate the nearest Authorised Delonghi Service Agent.
Servicing shall be carried out only by authorized personnel.
The appliance shall not be modified.
LUBRICATION OF THE GAS TAPS
If the gas tap becomes stiff, it is necessary to dismantle it carefully and clean it with petro- leum spirit.
Specialist high temperature resistant grease should be used to lubricate the tap before replacing.
These operations must be carried out by an authorized person/service agent.
Figure 25
26