GE JMP28GR, JMP32AR, JMP31WR, JMP29GR manual After a Clean Cycle, How to Delay Start of Cleaning

OPERATING THE SELF-CLEANING OVEN

(continued)

After a Clean Cycle

When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature, the word “LOCK” goes out and the door can be opened.

After a clean cycle, you may notice some white ash in the oven. Just wipe it up with a damp cloth. If white spots remain, remove them with a soap-filled steel wool pad. Be sure to rinse thoroughly with a vinegar and water mixture. These deposits are usually a salt residue that cannot be removed by the clean cycle.

If the oven is not clean after one clean cycle, the cycle may be repeated.

How to Delay Start of Cleaning

Delay Start is setting the oven timer to start the clean cycle automatically at a later time than the present time of day. NOTE: Before beginning, make sure the oven clock shows the correct time of day.

Quick Reminder—Delay Start for Self-Clean:

1.Prepare the oven for cleaning.

2.Press the CLEAN pad.

3.Press the INCREASE pad.

4.Press the STOP TIME pad.

Time that appears is 3 hours later than the time of day. Press the INCREASE pad until the Stop Time you desire appears in the display. The self-clean cycle will automatically begin 3 hours before the Stop Time you select.

For example: Let’s say it’s 7:00 and you want the oven to begin self-cleaning at 9:00 after you’re finished in the kitchen. The oven is just soiled a normal amount so the normal Clean Time of 3 hours is prefemed.

Step 1: Prepare the oven for cleaning.

Step 2: Close the oven door.

Step 3: Press the CLEAN pad.

CLEAN

Step 4: Press the INCREASE pad.

A

Step 5: Clean Time for heavy soil can be set for

4 hours. If a longer or shorter Clean Time is desired, press the INCREASE or DECREASE pad until desired Clean Time is displayed.

Step 6: Press the STOP TIME pad.

c1 “10:00” appears on display and STOP “STOP TIME” flashes. The control TIME automatically sets Stop Time by

adding the Clean Time to the time of day. In this example, the time of day is 7:00 and the Clean Time is 3 hours. Adding 3 hours to the time of day equals 10:00.

Ste~ 7: Change Stou Time from 10:00 to 12:00 by pre~sing the I~CREASE pad until “12:00” appe& in the display. The words “DELAY CLEAN” will also appear in the display.

The self-clean cycle will automatically begin at 9:00 and finish at 12:00. The word “ON” will appear on the display at 9:00.

When the oven locks, the word “LOCK” will be displayed and the door will be locked in position. It will not be possible to open the oven door until the temperature drops below the lock temperature.

When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature, the word “LOCK” goes out and the door can be opened.

Step 8: When the LOCK light is off open the door.

22

—