CONNECTIONS | Electrical connections |
|
|
2. Now the terminal block is accessible
Terminal block
3.The appliance is shipped with a strain relief device to secure power cord. Insert the power cord through the strain relief and tighten it.
4.Insert the strain relief device into the hole and push it to the left. Tight up the power cord and strain relief device with the screw.
5.Install the power cord: attach the wires to the termi- nal block as follows:
-neutral (white wire) to N,
-the L1 and L2 (red and black wire) to P1 and P2,
-the ground to T (yellow / green).
NOTE: Make sure the wires are completely inserted into the terminals and secure connections are made.
6.
7.Make sure that everything is properly secured.
REMINDER: connections to main power supply preferably suppose to be hardwired into the wall Junction Box compare using the Plugs and Outlet.
Fix the cable well below the hot air outlets, at the rear of the oven, never in front of them.
Installation and User Guide CornuFé 1908 - 36" - USA / Can | 25 |