Oven Light | Storage Drawer |
[ACAUTIONS:
•Disconnect power to range before replacing light bulb.
•Use a dry potholder to prevent possible harm to hands when replacing bulb.
•Be sure bulb is cool before touching bulb.
•Donottouchhotbulbwithadampclothasthismaycause the bulb to break.
To replace oven light bulb:
1.Remove light bulb.
2.Replace with a 40 watt appliance bulb.
3.Reconnect power to range. Reset clock.
Leveling Legs
ACAUTION
•Be sure the
The range should be leveled when installed. If
the range is not level, turn the plastic leveling IIi vi'_
legs, located at each comer of the range, until
ACAUTION:
•Do not store plastic, paper products, food or flammable materials in this drawer.The drawer
may become too warm for these items when the oven is in use.
The storage drawer can be removed to allow you to clean under the range.
To remove:
1.Empty drawer andpull out to the first stop position.
2.Lift up the front of the drawer.
3.Pull out to the second stop position.
4.Grasp sides and lift drawer up and out.
To replace:
1.Fit the ends of the drawer glides into the rails in the range.
2.Liftstop uppositionfront .of drawer and gently push in to the first
3.Lift drawer up again and push until drawer is closed.
Convenience Outlet
(Canadian models only)
|
|
| located on the lower left |
| |
range is level. | __,_ |
| The convenience outlet |
|
|
|
|
| side of the backguard. It is |
| |
| ___ |
| useful for small appliances |
| |
_ | _ |
| When using the outlet | be | SWITCH |
| CmCU,TBREAKER0 | ||||
| V_%LEVELING | LEG | sure the appliance cord | does not rest on or near the | |
surface element. If the surface element is turned on, the cord and outlet will be damaged.
The convenience outlet circuit breaker may trip if the small appliance plugged into it exceeds 10 amps. To reset the circuit breaker, press the switch located on the lower edge of the backguard. (See illustration.)
16