Maytag 110 installation instructions Conversion to LP gas, Jets, Stick on label, Tap Bypas screws

Page 29

INSTALLATION

Check the appliance is electrically safe and gas sound when you have finished.

Conversion to LP gas

Check in the Technical Data section at the back of the book that the cooker is convertible to the gas you want to use.

This conversion must be performed by a competent person. After conversion the installation must comply with the relevant regulations and also the local electricity supply company requirements. Read the instructions before converting this appliance.

Failure to convert the appliance correctly could invalidate any warranty or liability claims and lead to prosecution.

This instruction must be used in conjunction with the rest of the appliance instruction, in particular for information on Standards, cooker positioning, connection hose suitability etc.

When servicing or replacing gas-carrying components disconnect from gas before commencing operation and check appliance is gas sound after completion.

Do not use re-conditioned or unauthorised gas controls.

Disconnect from the electricity supply before commencing servicing. Before electrical re-connection, check that the appliance is electrically safe.

Jets

Remove burner caps and heads. Remove old jets. Fit new jets (see the table for the correct jets). Reassemble in reverse order.

Lift the control panel, pull forward and disconnect the wiring from the rear.

A tap bypass screw

Remove the tap bypass screw and replace with the correct screw. See the table for the correct bypass screws.

Stick on label

Stick the appropriate label on to the data badge to indicate the gas the appliance is now set for.

Pressure Testing

Connect the appliance to the gas supply. Check the appliance is gas sound.

The gas pressure can be measured at one of the hotplate burner jets (NOT a Wok burner). Make sure that the cooker is not connected to the electricity supply. Lift off

a burner head. Fit the pressure gauge to the jet. Turn on one of the other burners and light it with a match. Turn on the control for the hotplate burner to which the pressure gauge is fitted. Press in the knob to allow the gas through and register the pressure on the gauge.

After checking the pressure, turn the taps off and replace the burner head.

Reassemble burner top, making sure it is reassembled in the correct way on the burner body.

Tap Bypas screws

Pull off all the control knobs.

Open the oven doors and remove the 2 fixing screws, one at each end, underneath the control panel.

Pull off the push fit control panel end caps at each end and remove the end fixing screws under the end cap.

Check the appliance is gas sound.

Check operation of all the burners.

Check that the appliance is electrically safe.

 

Natural Gas 20mb

 

L.P. Gas

 

 

 

 

 

 

 

 

 

Hotplate

 

Injector

Screw

 

Injector

Screw

Wok burner

3.5kW

internal 80

96

3.5kW (246g/h)

internal 54

57

external 129

external 77

 

 

 

 

 

Large Burner

3.0kW

134

54

3.0kW (210g/h)

87

40

Medium Burners

1.7kW

109

39

1.7kW (119g/h)

68

32

Small Burner

1.0kW

75

38

1.0kW (70g/h)

51

28

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Dual Fuel Range Cooker Users Guide Installation InstructionsBe safe InstallationGas and Electricity on Peculiar smellsContents Hotplate Burners Griddle Grill Care and CleaningWok cradle Plate Warming WarmerHolding of ‘Hot Food’ Use only heat resistant dishesLeft Hand Oven The Right Hand Oven OvensClock Clock Special Features Key Lock Auto is showing, you want to reset to manual cookingTo activate the key lock To turn off the key lockBoth Ovens Cooking using the timerMulti-function oven Defrost Multi-function oven functionsSteam Oven shelvesOven light Food Multi-function Oven cooking guideEnsure meat and poultry is fully cooked before serving Roast Meats Oven Cooking chart Conventional and full Fan oven functionsHotplate burners Cleaning your cookerCentral hotplate Wok burnersPart Finish Recommended Cleaning Method Cleaning Table HotplateOutside of cooker Oven and GrillGrill GriddleControl Panel and Doors OvensTroubleshooting Hotplate burners will not light Turn off the power supplyOven light is not working 0800 111 General Safety InstructionsIf you smell gas This appliance is heavy, take care when moving it Thank you InstallationDear Installer Location of Cooker Provision of VentilationConversion These are not supplied by with the cooker butPositioning the Cooker Checking the partsMoving the Cooker Unpacking the CookerLevelling Fitting a stability bracketGas Connection Pressure testingElectrical Connection PressuresFitting the plinth Oven checkCustomer care Thank youJets Conversion to LP gasStick on label Tap Bypas screwsServicing To Remove a Hotplate Burner Spark Electrode To Adjust the Oven Door Catch KeeperTo Remove an Oven Door To Remove the Hotplate Spark GeneratorTo Replace an Oven Fan To Remove Oven Inner BackTo Remove an Oven fan Element To Remove the LH Oven Bottom and Top ElementsCircuit Diagram Dimensions Technical DataThis cooker is category II2H3+ ConnectionsRatings Maytag UK
Related manuals
Manual 2 pages 17.4 Kb

110 specifications

The Maytag 110 series is a line of high-efficiency washing machines known for their robust performance, reliability, and user-friendly features. Designed to meet the demands of modern households, the Maytag 110 stands out due to its powerful cleaning capabilities and advanced technology.

One of the key features of the Maytag 110 is its impressive capacity. With its spacious drum, this washer can accommodate large loads of laundry, making it ideal for families or individuals who require frequent washing. Its efficient design allows users to clean more clothes in fewer cycles, ultimately saving time and energy.

In terms of performance, the Maytag 110 employs a commercial-grade motor which provides consistent and powerful agitation. This motor reduces vibrations and noise during the wash cycle, ensuring a quiet operation. Additionally, the machine features a unique PowerWash cycle that combines extra cleaning action and heated water to tackle tough stains and ensure an impeccable clean.

The Maytag 110 also incorporates advanced washing technology. The Precision Clean wash system optimizes water usage while ensuring maximum cleaning efficiency. This system manages the water levels based on the size of the load, which helps to conserve water while ensuring that each item is thoroughly cleaned.

Moreover, the Maytag 110 is equipped with a variety of wash cycles and settings to accommodate different fabric types and soil levels. Options like Delicate, Heavy Duty, and Quick Wash allow users to customize their washing experience, ensuring the best care for every garment.

Durability is another hallmark of the Maytag brand, and the 110 series is no exception. Constructed with a solid metal frame and a stainless steel wash basket, the unit is designed to withstand the rigors of daily use. The robust build quality is further complemented by a 10-year limited parts warranty, reassuring users of the machine's longevity.

Additional thoughtful features include a lid lock system for safety, LED cycle status indicators, and a large, easy-to-use control panel that simplifies operation. The Maytag 110 also adheres to energy efficiency standards, making it an environmentally friendly choice that can help reduce utility bills.

In summary, the Maytag 110 series offers a powerful, efficient, and durable washing solution. With its combination of advanced technology, user-friendly design, and effective cleaning capabilities, it represents a reliable option for anyone seeking a high-performance washing machine.
Top Page Image Contents