COOKTOP USE
Cooktop/Oven Temperature Controls
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death or fire.
Electric igniters automatically light the surface burners when control knobs are turned to LITE.
Before setting a control knob, place filled cookware on the grate. Do not operate a burner using empty cookware or without cookware on the grate.
IMPORTANT: Do not lift the cooktop on sealed burner models. Lifting the cooktop can lead to damage and the range operating improperly.
To Set Burner Temperature:
1.Push in and turn knob counterclockwise to LITE.
All four surface burners will click. Only the burner with the control knob turned to LITE will produce a flame.
2.Turn knob to anywhere between HI and LO. The clicking will stop. Use the following chart as a guide when setting heat levels.
SETTING | RECOMMENDED USE | |
|
|
|
LITE | ■ | Light the burner. |
|
|
|
HI | ■ | Start food cooking. |
| ■ Bring liquid to a boil. | |
|
| |
MED (Medium) | ■ Hold a rapid boil. | |
| ■ Quickly brown or sear food. | |
| ■ Fry or sauté foods. | |
| ■ Cook soups, sauces and gravies. | |
| ■ Stew or steam foods. | |
|
|
|
LO | ■ | Keep food warm. |
| ■ | Simmer. |
|
|
|
To Set Oven Temperature:
Push in and turn oven control knob to desired temperature setting.
Power failure
In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to LITE. After burner lights, turn knob to setting.
Surface Burners
A
| C |
B |
|
| D |
| E |
A. Burner cap (underside) | D. Burner base |
B. Alignment pins | E. Gas tube opening |
C. Igniter |
|
IMPORTANT: Do not obstruct the flow of combustion and ventilation air around the burner grate edges.
Burner cap: Always keep the burner cap in place when using a surface burner. A clean burner cap will help avoid poor ignition and uneven flames. Always clean the burner cap after a spillover and routinely remove and clean the caps and bases according to the “General Cleaning” section.
Gas tube opening: Gas must flow freely throughout the gas tube opening for the burner to light properly. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the gas tube opening. Keep spillovers out of the gas tube by always using a burner cap.
A
B
A.
B.Burner ports
Burner ports: Check burner flames occasionally for proper size and shape as shown above. A good flame is blue in color, not yellow. Keep this area free of soil and do not allow spills, food, cleaning agents or any other material to enter the burner ports.
To Clean:
IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Do not use oven cleaners, bleach or rust removers.
1.Remove the surface burner grates.
2.Remove burner cap from the burner base and clean according to “General Cleaning” section.
3.Clean the gas tube opening with a damp cloth.
6