Amana ARTC7511 Converting 3-Wire to 4-Wire Power Cord, Anti-tip Bracket Installation, Level Range

Page 9

Converting 3-Wire to 4-Wire Power Cord

1.Remove rear wire cover.

2.Remove bottom strain relief screw and retain for further use.

3.Remove screw/hex nuts from terminal block and retain for further use.

4.Remove all 3-wire or cable leads from the terminal block and proceed to remove the power cord from the range by pulling in a downward motion so the cord is removed from strain relief.

5.To install the 4-wire cord, please follow step 3 through step 9 of Installing 4-Wire Power Cord section.

Anti-tip Bracket Installation

To reduce risk of range tipping, secure range with a properly installed anti-tip bracket.

1.Measure 31/2 inches from back wall on right and left side of cabinet cutout. Mark measurements on floor and draw a straight line connecting marks.

2.Position anti-tip bracket.

If range is installed beside cabinet(s), place anti-tip bracket with back edge on line drawn on floor and side of bracket against cabinet.

If range is not installed beside cabinet(s), position range where it will be installed. Draw a line along side of range on floor from front to back. Remove range. Place anti-tip bracket with back edge over line drawn 31/2 inches from back wall and side of bracket over line drawn along side of range on floor.

Anti-tip bracket can be installed on either right or left side.

or

3 1/2"

4.Drill 2 holes.

If drilling into wood, use a 3/32-inch drill bit.

If drilling into concrete, use a 3/16-inch masonry drill bit and insert plastic anchors.

5.Secure bracket to floor using screws supplied.

6.Slide range into position, remove range storage drawer or lower panel and confirm anti-tip bracket is engaged with range leveling leg.

Level Range

!CAUTION

To avoid damaging oven door, do not lift or move range by oven door handle. Glass can break.

Carefully level range using legs provided. Range must be level to cook and bake uniformly.

Place a level on top oven rack or on range top when leveling.

Leveling legs must extended ¼ inch to engage anti-tip bracket.

Removal and Replacement of Range

1.Disconnect power to range.

2.Slide range forward.

3.Unplug range cord and place range aside.

4.Remove anti-tip bracket.

5.Install anti-tip bracket into new location using instructions provided with bracket or see Anti-tip Bracket Installation section in this manual.

6.To reinstall range, follow instructions in Installation section of this manual.

Anti-tip Bracket Installation

3. Mark 2 hole locations in anti-tip bracket.

9

Image 9
Contents Customer Please Read Manual Before Operating Range InstallerContents Important Safety Information Case of Fire PrecautionsSurface Element Fire Oven FiresPacking Material InstallationRange Location Cabinet OpeningPower Cord Requirements Power Supply LocationIrregular Cabinet and Countertop Heights Line Voltage RequirementsNeutral terminal connect wire Installing 3-Wire Power CordPower terminals Ground strapInstalling 4-Wire Power Cord Anti-tip Bracket Installation Converting 3-Wire to 4-Wire Power CordRemoval and Replacement of Range Level RangeARTC7511 Range Features OperationPreparing to Cook with Smoothtop Elements Surface Element Settings To use inner elementTo use both inner and outer element Cooking Utensils Type Temperature UsesOven Cooking Methods Oven Signals Electronic Oven Control and Oven SwitchesOven Switches Pad DescriptionOther Features DisplayDisplay Glossary Setting Minute Timer Setting ClockPrepare for Bake, Timed Bake, and Delayed Bake Canceling Minute TimerOven Rack Placement Bake Pan PlacementConvection Pan Placement Oven RacksTo Cancel Remaining Cooking Time Baking or Convection BakingTimed Baking or Timed Convection Baking Broiling or Convection Broiling Delayed Baking or Delayed Convection BakingBroiling Tips Broiling or Convection BroilingDehydration Dehydration TipsFood Drying Time Results Prepare for Self-clean Delayed Self-clean Cycle Self-cleaningInterrupt Self-Clean Cycle Cooking Guide Food Oven Temperature Cooking TimeBaking Guide Poultry Roasting GuideBeef and Pork Roasting Guide Broiling GuideFood Thickness Rack position Cooking time Convection Broiling Guide Convection Baking GuideFood Oven temperature Fahrenheit Cooking time Convection Poultry Roasting GuideConvection Beef and Pork Roasting Guide Care and Cleaning Removing Oven Door Replacing Oven LightRemoving Storage Drawer Cleaning Part Materials to Use General Directions Problem Cause To Prevent To Remove Cleaning Smoothtop RangetopProblem Check Before Calling for ServiceCooking Products excluding wall ovens WarrantyPage Quick Reference Instructions

ARTC7511 specifications

The Amana ARTC7511 is a highly regarded model within the landscape of home appliances, specifically intended for those who value efficiency and modern technology in their cooking environments. This versatile appliance excels in combining advanced features, cutting-edge technology, and contemporary design, making it a preferred choice for both culinary enthusiasts and everyday users.

One of the main features of the ARTC7511 is its robust cooking performance. Boasting a powerful heating element, this unit ensures that meals are prepared swiftly and evenly. The high cooking wattage provides quick preheating capabilities, allowing users to minimize wait times when preparing their favorite dishes. The appliance also offers multiple cooking settings, accommodating various cooking methods such as baking, broiling, and roasting, giving users the flexibility to experiment with a wide range of recipes.

The Amana ARTC7511 incorporates user-friendly controls that enhance the overall cooking experience. The intuitive interface allows for easy navigation and adjustment of settings, ensuring that even novice cooks can take full advantage of the appliance's capabilities. The digital display is clear and informative, providing real-time feedback and allowing users to monitor cooking progress at a glance.

In terms of size and capacity, the ARTC7511 is designed to fit seamlessly into standard kitchen layouts without sacrificing performance. Its spacious interior can accommodate larger dishes, making it suitable for cooking family-sized meals or hosting gatherings. The appliance also features a removable oven rack and an easy-to-clean interior, simplifying maintenance and upkeep.

Safety is a top priority in the design of the ARTC7511. The unit comes equipped with features such as an automatic shut-off function, which reassures users by minimizing risks of overheating and fire hazards. Additionally, the cool-to-the-touch exterior prevents accidental burns, making it a safe option for all household members.

Aesthetic appeal is another hallmark of the Amana ARTC7511. Its sleek design and modern finish enhance the kitchen's overall look, integrating well with various decor styles. The appliance’s durability, combined with the manufacturer's commitment to quality, ensures that it remains a reliable addition to any kitchen for years to come.

In summary, the Amana ARTC7511 stands out as a noteworthy appliance that combines performance, safety, and style. With its powerful cooking capabilities, user-friendly controls, and safety features, it is an excellent investment for those looking to elevate their culinary experiences. Whether cooking everyday meals or preparing special dishes, the ARTC7511 provides the tools necessary for success in the kitchen.