| TROUBLESHOOTING GUIDE |
|
|
OVEN PROBLEM | POSSIBLE CAUSES AND/OR REMEDY |
Range does not function | Range is not connected to electrical power. Ask a professional to check |
| power circuit breaker, wiring and fuses. |
Heating elements does not work | Temperature setting knob is set a too low temperature, increase it by |
| turning in clockwise direction . |
| And/or |
| Cooling fan system does not operate correctly. |
Oven light does not work | Light bulb is burned out. Range is not connected to power/ clean is cycle |
| on |
Igniters does not work | Circuit is tripped. Fuse is blown. Range is not connected to power. |
Igniters sparking but no flame | Gas supply valve is in “OFF” position. Gas supply is interrupted. |
ignition |
|
Igniters spark continuously after | Ignition micro‐switches remain incorrectly engaged; call a qualified |
flame ignition | technician for repair. |
Burner ignites but flame is large, | Burner ports are clogged. Unit is not set to the appropriate gas type. Call |
distorted, or yellow | a qualified technician for gas conversion procedure. |
| Check the circuit breaker or fuse box to your house. Make sure there is |
Oven is not heating | proper electrical power to the oven. Make sure the oven temperature |
| has been selected. |
Oven light is not working | Replace or reinsert the light bulb if loose or defective. |
properly |
|
Cannot remove lens cover on | There may be soil build‐up around the lens cover. Wipe lens cover area |
light | with a clean dry towel prior to attempting to remove the lens cover. |
32