Verona VEBIG24 warranty Replacing the Oven Light, Removing the Oven Door

	￿
OVEN DOOR
The internal glass of the oven door can be easily removed for cleaning by unscrewing
the two lateral fixing screws (fig. 4.3).
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door
glass since they can scratch the surface, which may result in shattering of the
glass.
Do not store flammable material in the oven.
REPLACING THE OVEN LIGHT
Before any maintenance is started involving electrical parts of the appliance, it must be	Fig. 4.3
disconnected from the power supply.

–Let the oven cavity and the broil burner cool down;

–Switch off the electrical supply;

–Remove the protective cover;

–Unscrew and replace the bulb with a new one suitable for high temperatures (300°C- 570°F) having the following specifications: 120V 60 Hz, 15W, E14.

–Refit the protective cover

NOTE: Oven bulb replacement is not covered by your guarantee

REMOVING THE OVEN DOOR

To facilitate oven cleaning, it is possible to remove the door.

Please follow the instructions carefully:

–Open the door completely.

–Push down the lever “L” and, keeping it in this position, slowly close the door in order to block the hinge (fig. 4.4).

–Grip the door (as indicated in fig. 4.5) and, while closing it, release the two hinges as shown in fig. 4.6.

–Rest the door on a soft surface.

DOOR ASSEMBLY

–Grip the door with your hands placed near the hinges and raise the levers “H” with your forefingers (fig. 4.6)

–Insert the hinges in their position until levers “H” are hooked.

–Open the door completely to obtain the release of levers “L”.

L

Fig. 4.4

Fig. 4.5

H

Fig. 4.6

13