Electrical Grounding Instructions

GENERAL INFORMATION

1.Installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1-Latest Edition.

2.Installation in manufactured (mobile) home: installation must conform with the Manufactured Home Construction and

Safety Standard, Title 24 CFR, Part 3280 [formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.

3.Installation in Recreational Park Trailers: installation must conform with state or other codes or, in the absence of such codes, with the Standard for Recreational Park Trailers, ANSI A119.5.

4. WARNING!!

This appliance shall not be used for space heating. This information is based on safety considerations.

5.AlI openings in the wall behind the appliance and in the floor under the appliance shall be sealed.

6.Keep appliance area clear and free from combustible materi- als, gasoline, and other flammable vapors.

7.Do not obstruct the flow of combustion and ventilation air.

8.Disconnect the electrical supply to the appliance before ser- vicing.

9.When removing appliance for cleaning and/or service;

A.Shut off gas at main supply.

B.Disconnect AC power supply.

C.Disconnect gas line to the inlet pipe.

D.Carefully lift appliance out of cabinet cutout.

CAUTION: Use care in handling.

10.Electrical Requirement

Electrical installation should comply with national and local codes.

11.Air Supply and Ventilation

The installer must refers to local/national codes.

12.Gas Manifold Pressure

Natural gas - 4.0” W.C.P. LP/Propane - 11.0” W.C.P.

13.The misuse of oven door (e.g. stepping, sitting, or leaning on them) can result in potential hazards and/or injuries.

WARNING!!

The oven must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA No 70-latest edition. Installation should be made by a Iicensed electrician.

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

This appliance is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded socket. Do not cut or remove the grounding prong from the plug.

For personal safety, this appliance must be properly grounded.

Do not under any circumstances cut or remove the third (ground) prong from the power plug.

REPLACEMENT PARTS

Only authorized replacement parts may be used in performing service on the oven. Replacement parts are available from factory authorized parts distributors. Contact the nearest parts distributor in your area.

VEBIG24 specifications

Verona VEBIG24 is a cutting-edge solution designed for modern heating needs, renowned for its efficiency and advanced technology. This innovative heating appliance caters to both residential and commercial applications, delivering reliable performance tailored to various environments.

One of the standout features of Verona VEBIG24 is its powerful condensing technology. This enables the boiler to recover heat from exhaust gases, significantly increasing overall energy efficiency. By maximizing the use of available energy, the VEBIG24 reduces fuel consumption and lowers greenhouse gas emissions, making it an environmentally friendly choice.

The VEBIG24 operates on multiple fuel types, including natural gas and propane, providing versatility for users. Its compatibility with different energy sources allows for easy integration into existing heating systems, making it a practical option for various applications. The unit boasts a robust output capacity, ensuring that it meets the heating demands of even the largest spaces.

Additionally, Verona has incorporated smart controls into the VEBIG24, allowing users to easily monitor and adjust settings through a user-friendly interface. These intelligent controls enhance the efficiency of the heating system by enabling precise temperature regulation and scheduling. Users can optimize their energy usage, which not only saves money but also promotes sustainable living.

Safety and reliability are paramount in the design of the VEBIG24. It comes equipped with advanced safety features, including flame failure protection and pressure monitoring systems, ensuring trouble-free operation. The boiler is constructed using high-quality materials that guarantee durability and long-term performance, reflecting Verona's commitment to excellence.

Moreover, the Verona VEBIG24 is characterized by its compact design, making it suitable for installations in limited spaces. Its modern aesthetic allows it to blend seamlessly into a variety of environments without compromising on performance.

In summary, the Verona VEBIG24 is an exemplary heating solution that combines advanced technology, efficiency, and reliability. Its condensing capabilities, versatile fuel options, smart controls, robust safety features, and compact design make it an ideal choice for anyone looking to enhance their heating system while prioritizing sustainability and cost-effectiveness. Whether for home or commercial use, the VEBIG24 stands out as a premium heating option in today's market.