Verona CTG212FD warranty Gas connection, Explosion Hazard, Manual Shut-off Valve fig

Page 12

gas connection

Explosion Hazard

Use a new CSA or UL approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connec- tions.

If connected to LP, have a quali- fied person make sure gas pres- sure does not exceed 14" water column.

Examples of a qualified person include licensed heating per- sonnel, authorized gas compa- ny personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

All gas connections must be made according to national and local codes. This gas supply (service) line must be the same size or greater than the inlet line of the appliance. Sealant on all pipe joints must be resistant to te action of LP/Propane gas.

The cooktop is equipped for the use with NATURAL gas. It is design-certified by CSA International for NATURAL and L.P. gases with appropriate conversion.

The model/serial rating plate, located on the underside of the burner box, has information on the type of gas that can be used. If this information does not agree with the type of gas available, check with the local gas supplier. See page 16 for L.P. gas conversion instructions.

1. Manual Shut-off Valve (fig. 5.1):

The supply line shall be equipped with an approved shutoff valve. This valve should be located in the same room as the cooktop and should be in a location that allows ease of opening and closing (in a position where it can be reached quickly in the event of an emergency).

Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the appliance.

Shutoff valve

“open” position

To cooktop

Gas supply line

Fig. 5.1

2.Pressure Regulator (figures 5.2a - 5.2b - 5.2c - 5.2d):

a)All heavy duty, commercial type cooking equipment must have a pressure regulator on the incoming service line for safe and efficient operation, since service pressure may fluctuate with local demand. The regulator supplied with this cooktop must be installed before any gas connections are made.

Use supplied pressure regulator only.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model CTG212FD Dear Customer Important Precautions and Recommendations Tips for the UserFeatures Control Panel DescriptionUsing the gas cooktop GAS BurnersLighting GAS Burners Choice of Burner figCleaning and maintenance Correct Replacement of the Burners Burners and GridsInstallation Instructions Tools Needed for InstallationReplacement Parts Electrical Grounding InstructionsInstallation to the cabinet Cooktop DimensionsProximity to Side Cabinets Fastening the Cooktop .3Gas connection Explosion HazardManual Shut-off Valve fig Pressure Regulator Installation Step StepGAS Connection Specification GasketFlexible Connections Screw Manifold Test point Pressure NPT UnscrewLeak Testing Setting the Pressure Regulator figRigid Pipe Connections Conversion to LP/PROPANE GASOperations to be Performed When Substituting the Injectors Regulating the Burner Minimum SettingInjectors Table Electrical connection Recommended ground methodWiring Diagram Wiring diagram keyCod ß2

CTG212FD specifications

The Verona CTG212FD is a modern gas range that stands out for its combination of performance, style, and innovative features, making it an excellent choice for both avid home cooks and professional chefs alike. This range is designed to bring the warmth and creativity of cooking back into the kitchen with a host of functionalities that elevate culinary experiences.

One of the main features of the Verona CTG212FD is its dual-fuel capability. This means it combines the precision of a gas cooktop with the even heating of an electric oven. This hybrid system allows cooks to achieve better control over their stovetop cooking while benefiting from the consistency of baking with an electric oven. This dual-fuel design is perfect for a variety of cooking methods, from searing meats to baking delicate pastries.

Another standout characteristic of the Verona CTG212FD is its powerful gas burners. The range comes equipped with multiple burners that offer different BTU outputs, allowing for a range of cooking needs. High-BTU burners are ideal for rapid boiling or frying, while lower-BTU burners provide gentle heat for simmering sauces or melting chocolate. This versatility ensures that home chefs can tackle any recipe with ease.

The design of the Verona CTG212FD is equally impressive. With a sleek stainless steel finish and a professional-grade look, it adds an element of elegance to any kitchen. The ergonomic control knobs and the large oven window provide both practical functionality and a chic aesthetic. Additionally, the oven features a spacious interior that accommodates various baking trays and dish sizes, making it suitable for batch cooking or preparing large family meals.

The Verona CTG212FD also boasts advanced technologies such as a convection oven that circulates hot air for even cooking results. This feature is crucial for baking, as it ensures that heat is distributed uniformly, allowing baked goods to rise perfectly and cook evenly. Moreover, the range offers self-cleaning capabilities, making maintenance simple and efficient for busy home chefs.

Overall, the Verona CTG212FD combines high performance, modern technology, and stylish design, making it a standout choice for anyone looking to enhance their cooking experience. Its dual-fuel system, powerful burners, elegant appearance, and user-friendly features create an ideal environment for culinary creativity.
Top Page Image Contents