MODEL EDW194E OPERATING INSTRUCTIONS
CONTROL PANEL
Indicator
ENGLISH
Programs
LCD Window
Lights
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
On/Off | Program | Option | Start | |
Button | Button | Button | ||
Buttons | ||||
|
|
|
ON/OFF BUTTON
Press this button to turn on the power to the machine. The power must be on before you can select the program and options.
LCD WINDOW
The LCD displays programs, delay start hours, and program run times. It also displays error codes (see page 31).
PROGRAM BUTTON
Press the program button until the number for the program you wish to select displays (e.g., P1, P2, etc.). The program numbers correlate to the order in which the programs are shown on the control panel, starting on the left (Soak and Hold).
OPTION BUTTONS
Please note that you must select the options after you’ve selected the wash program and before you start the dishwasher.
Delay Start 
You can delay starting the program from 1 to 16 hours. Press this button until the number of hours you wish to delay starting the program displays on the LCD. The small light above this button will glow to indicate that you have selected this option.
Top Load 
This option is designed to save water and energy by allowing your to wash only the top or bottom basket. The indicator light above this button will glow when this option is selected. (This option is not available with the Soak and Hold program.)
Press the Top Load button once to wash the top basket only. The LCD will display two bars across the top to indicate the top basket wash has been selected.
To wash the bottom basket only, press this button twice. The LCD will display two bars across the bottom to indicate the bottom basket wash has been selected.
No Prewash 
This option lets you turn off the prewash cycle and is only available for programs with a prewash, i.e., Pots
&Pans and Heavy Wash. The indicator light above this button will glow to indicate that you have selected this option.
Dry Time 
This button overrides the automatic drying time for the program you select and lets you specify the length of time to fan dry the dishes. The indicator light above this button will glow when you have selected this option.
Your options are 0, 20, 35, or 45 minutes. (The
A0 = no dry | A2 = 35 minutes |
A1 = 20 minutes | A3 = 45 minutes |
START BUTTON
Once you have selected a program and options, press this button and close the door to start the dishwasher. A signal will sound to indicate the program has begun and the LCD will display the estimated program run time.
If you stop a program in progress by opening the door, you will need to press the Start/Stop button again to restart the program from the interrupted point.
INDICATOR LIGHTS
The On light indicates that the power to the unit is on. The Rinse Aid light glows when you need to add rinse aid. (See page 20 for instructions on how to load the rinse aid dispenser.)
ADDING AN ITEM
WARNING!
Be extremely careful when opening the door during a program. The water is hot and you could get scalded.
To add an item after a program has started, open the door slightly until the spray arms stop turning. You can then open the door fully and place the item into the dishwasher. Close the door and press the Start button to restart the program from where it stopped.
25