TECHNICAL DATA
Water pressure | |
Power | |
Heating element | 1200 w |
Max loading | 1450 w |
EASY CONNECTION
Your Eurotech comes with everything you need for an easy,
nPEX tubing with 3/8” compression
nDrain hose— Corrugated drain hose and holder to form a high loop.
nElectrical cord and
WARNING! Do not use an extension cord for this appliance.
WATER SUPPLY
WARNING! Plumbing connections must comply with applicable sanitary, safety and plumbing codes in your area.
The dishwasher comes with a
to insert the black rubber washer (enclosed in the hardware package) into the PEX hose connection before you attach it to the water supply.
The electrical and water supplies should come through the right side of the machine, a maximum of 2” (50
mm)from the back wall and
For service convenience, a
It is important that the water supply line and the
WARNING! In order to prevent heat damage to the inlet valve, all solder connections must be made before the water line is connected to the dishwasher.
NOTE: Be sure to run the PEX water supply line, drain line, and power supply cord through the hole to sink compartment before moving the dishwasher into position.
ENGLISH
(1)Water supply
(2)Water supply valve (not supplied)
9