CARE AND MAINTENANCE
The interior of your Eurotech dishwasher is made of surgical quality stainless steel that has been electro- polished to make it the smoothest surface available. The smooth surface prohibits the accumulation of dirt and bacteria inside the unit. If the water in your area is especially hard, however, lime deposits could form inside the machine. If this happens, you can remove them by putting two tablespoons of citric acid in the detergent compartment and running a Normal program. In extremely hard water areas you may need to repeat this process a few times to remove hard water deposits.
CLEANING THE FILTERS
For your convenience, we have placed the drain pump and filtering system within easy reach inside the tub. There are three components of the filtering system: the central filter, the external water filter, and the filter grid.
In hard water areas, it may be necessary to clean chemical buildup from the filters every 12 to 18 months. To do this, follow the steps below:
1.Remove the central filter.
2.Remove the external water filter.
3.Remove the filter grid.
4.Wash all three filters gently in hot, soapy water and rinse them thoroughly.
ENGLISH
| WARNING! Never run the dishwasher without the filters in place. |
1 | 2 |
3 |
CLEANING THE DOOR
To clean the edge around the door, use only a soft warm, damp rag. To prevent penetration of water into the door lock and electrical components, do not use a spray cleaner of any kind.
WARNING!
Never use a spray cleaner of any kind on the door panel. You could damage the door lock and electrical components. And never use abrasive cleaners or scouring pads on the outer surfaces because they will scratch the finish. Also, some paper towels can scratch or leave marks on the stainless steel surface.
CLEANING THE SPRAY ARMS
Wash the spray arms in warm, soapy water. Use a soft brush to clean the jets. Rinse thoroughly and replace.
27