Electricity Precautions

To prevent electrical shock, personal injury or property damage, read and follow all instructions and warnings.

•To protect against electric shock, do not immerse cord, plugs, or other electric parts in water or other liquids.

•Do not operate any appliance with a damaged cord or plug.

•Do not operate when the appliance is not working properly or when it has been damaged in any manner.

•Do not use outdoors, near a gas or electric burner, in a heated oven, refrigerator or freezer.

•Do not clean with metal scouring pads. Pieces can break off of the pad and touch electrical parts, creating a risk of electrical shock.

•Do not plug cord into wall outlet unless all controls are set to OFF position.

•Always turn control to OFF and unplug the appliance from outlet when not in use and before cleaning. Allow unit to cool completely before putting on or taking off parts and before cleaning.

•Your Rotary Oven has a short cord as a safety precaution to avoid pulling, tripping or entanglement. Position the cord so that it does not hang over the edge of the counter, table or other flat surface area.

•While use of an extension cord is not recommended, if you must use one, make sure the cord has the same or higher wattage as the Rotary Oven (wattage is stamped on the underside of the unit). Position the extension cord so that it does not hang over the edge of the counter, table or other flat surface area.

•Use an electrical outlet that accommodates the polarized plug on the Rotary Oven. On a polarized plug, one blade of the plug is wider than the other. If the plug does not fit fully into the outlet or extension cord, reverse the plug. If the plug still does not fit fully, contact a qualified electrician. Do not alter the plug.

•Do not use an outlet or extension cord if the plug fits loosely or if the outlet or extension cord feels hot.

•Keep the cord away from hot parts of the appliance and hot surfaces during operation.