The contents of the Resident System Program (default value) are given below in the following Table 310.1:
Table 310.1 Resident System Program Contents
FUNCTION | DEFAULT VALUE |
Recall Button Timing
Pause Timing
Paging Timeout
Hold Recall
System Refresh Basis
Day Mode CO/PBX Ringing Assignment
Night Mode CO/PBX Ringing Assignment
Door Phone Assignment
Door Phone Chime Assignment
Off Hook Ringing Assignment
Internal Paging Zone Assignment
Attendant Station Assignment
Prime Line
Prime Line
Prime Line Assignment
CO/PBX Line Scan Assignment
CO/PBX Line Assignment
PBX Access Code Assignment
CO/PBX Group Assignment
Station Class Assignment
“1” + Dialing Assignment
Digit Rejection Assignment
Speed Dial Toll Override Assignment
Toll Restriction Override Table Assignment
Time is 0.4 sec.
Time is 1.0 sec.
Time is 60 sec.
Time is 60 sec.
Based on no change in status
Stations 1 and 9 ring for all CO/PBX lines
Stations 7 and 9 will ring
Door Phone not assigned
Stations 1 and 9 chime
Stations 1 and 9 ring
No stations in any zone
1 and 9 are attendant stations
Not assigned
No prime line on incoming calls
No private lines
Scan goes from CO/PBX line 2 to 1
All lines are CO
PBX access code “9” is assigned
All lines are group A
All stations are class 0
“1” + Dialing
No digits rejected
Toll restriction is overriden
No
/....\ Page