NEC 616 manual

--place programming overlay (if avail&le) on station keyset 1

--depress JTKEWCR[key (or "MENU REFD OUT" a on overlay)

--depress JON/OFF1key (or "EXIT" a on overlay)

--depress m\	key (or 3 on overlay)
--depress m	key (or "RESTRICT" on overlay)

--depress desired station select key (l- 16) to be progranmzd

--depress desired line key(s) (lr-,6) to be restricted at selected station - see note abve for LED status irdication of the various restriction states --repeat last two steps for each station being progranxned

--depress 1-I key (or "EXIT" B on overlay)

5) System Reset Using Keyset.No. 1

--depress JADD/ONJ key (or "PlEbKJFZAD CVI? a on overlay)

--depress 1-1 key (or "EXIT" B on overlay)

--depress q

--depress q --depress a L-depress IDsss[

--keyset No. 1 is now in "on-line" mode

- 14 -