Sharp R-200L, R-230L operation manual Before Operating, Getting Started, Clock Setting, Stop/Clear

A46369, SCA/SCNZ R200K O/M

BEFORE OPERATING

Getting Started

Step	Procedure	Pad Order	Display
	Ensure the oven door is closed.
1	Plug the oven into a power point and switch
	on the power.
		Flashing	eights

Press the STOP/CLEAR pad so that the oven beeps.

2

Only the dots will remain.

Clock Setting

* To enter the present time of day 11:34 (AM or PM).

Step	Procedure	Pad Order	Display
	Press the TIMER/CLOCK pad.

1
		The dots (:) will flash on and
		off.
2	Enter the correct time of day by pressing
	the numbers in sequence.
3	Press the TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time (eg. 13:45),			will appear in
the display.
Press the STOP/CLEAR pad and re-enter the time of day (eg. 1:45).

If you wish to know the time of day during the cooking or timer mode, press the TIMER/CLOCK pad. As long as your finger is pressing the TIMER/CLOCK pad, the time of day will be displayed.

Stop/Clear

Press the STOP/CLEAR pad once to:

1.Stop the oven temporarily during cooking.

2.Clear if you make a mistake during programming.

To Cancel a Programme During Cooking

Press the STOP/CLEAR pad twice.

6

R-200K_[P6-9]_DT5.p65 6 8/25/06, 10:20 AM