FoodSaver 18-0163 user manual How to Vacuum Package Using FoodSaver Designer Canisters

Page 9

T H E F O O D S AV E R U S E R M A N U A L

How to Vacuum Package Using FoodSaver

Designer Canisters

FoodSaver Designer Canisters are an excellent way to store delicate items in the refrigerator, pantry or on the countertop.

1Place the item(s) to be vacuum packaged inside the canister. Leave at least one inch between the contents and the rim of the canister.

3Place the lid on top of the canister.

4Insert one end of the Accessory Hose into the Accessory Port on the appliance. Insert the other end of the Accessory Hose into the hole on the top of the canister. Twist the gray hose fitting while inserting to ensure a tight fit.

5Set the Sealing Time Adjustment Switch to “1.” Vacuum package as per instructions on page 10, steps 5-7.

6Remove the Accessory Hose from the lid by gently twisting

the gray hose fitting and pulling up.

MPORTANT: Remember to remove the Accessory Hose from the Accessory Port on the appliance before you vacuum package in FoodSaver Bags. Remove the hose by gently twisting the gray fitting while pulling it out. Never yank or tug the hose as this may damage both the hose and the fitting.

How to Open the FoodSaver Designer Canister

To open the FoodSaver Designer Canister, press and hold the gray rubber button in the center of the lid. This will release the vacuum and allow the lid to be removed.

T H E F O O D S AV E R U S E R M A N U A L

How to Vacuum Package Using FoodSaver Bulk Storage Canisters and Square Canisters

Bulk Storage Canisters are an excellent way to store food in the refrigerator or pantry. The Square Canister is great for marinating since vacuum packaging opens the pores of food and cuts marinating time down to 20 minutes. They both operate the same way.

1Place the items(s) to be vacuum packaged inside the canister. Leave at least one inch between the contents and the rim of the canister.

2Turn the knob on the lid so the arrow points to “Vacuum.”

3Place lid on top of Bulk or Square Canister.

4Insert one end of the Accessory Hose into the Accessory Port on the machine. Insert the other end of the Accessory Hose into the hole on the top of the canister. Twist the gray hose fitting while inserting to ensure a tight fit.

5Set the Sealing Time Adjustment Switch to “1.”

Vacuum package as per instructions on page 10, steps 5-7.

14

15

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Vac1200 Welcome Table of ContentsFoodSaver Vac FoodSaver Accessories Important Tips Important SafeguardsClose the lid How to Make a Custom-Made Bag with FoodSaver RollsClose the lid How to Use the Sealing Time Adjustment Switch How to Use the Extended Vacuum ButtonHow to Use the Instant Seal Button Place the lid on top of the canister How to Vacuum Package Using FoodSaver Designer CanistersHow to Open the FoodSaver Bulk Storage or Square Canister How To Vacuum Package Using FoodSaver Universal Lids Care and Cleaning Instructions How to Vacuum Package Using FoodSaver Bottle StoppersWash bags in warm water using a mild dishwashing soap Allow bags to dry thoroughly before reusingFood Preparation and Storage Guide Place baking sheet in the freezer Vegetables should be blanchedStops the enzyme action, which Color and textureEach time the bag will be opened and repackaged Into the vacuum pump and help guarantee a good sealMaterial, like a paper towel. This Vacuum Packaging Non-Food Items TroubleshootingAir Was Removed From the Bag, But Has Come Back Into the Bag FoodSaver Designer Canister Will Not Vacuum Warranty and Service Information
Top Page Image Contents