T H E F O O D S AV E R U S E R M A N U A L
Important Safeguards
For Your Own Safety, Always Follow These Basic
Precautions When Using the FoodSaver Vac 1200:
1Read the instructions carefully.
2Do not use the appliance on wet or hot surfaces, or near a heat source.
3Do not immerse any part of the appliance, power cord or plug in water or other liquid.
4To disconnect, unplug the power cord from the electrical outlet. Do not disconnect by pulling on the cord.
5Do not operate the appliance with a damaged power cord or plug. Do not operate the appliance if it malfunctions or is in any way damaged. If the cord or the machine is damaged, it must be returned to an authorized service center.
6Do not use an extension cord with the appliance.
7Use only accessories or attachments recommended by Tilia, Inc.
8Use the appliance only for its intended use.
9Closely supervise children when using any electrical appliance. Do not allow the appliance to be used as a toy.
10120v Machines Only: The Vac 1200 has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
For Household Use Only • Please Save These Instructions
T H E F O O D S AV E R U S E R M A N U A L
Important Tips
Important Tips When Vacuum Packaging:
1Vacuum packaging is NOT a substitute for refrigeration.
2Use ONLY bags and rolls manufactured by FoodSaver.
3Do not allow the Vacuum Channel to fill up with liquids. This will render the machine unusable. To prevent it, avoid overfilling the bags and freeze liquids first.
4You can prevent liquids from being drawn into the unit by placing a folded paper towel at the top of the bag, but below the seal area, before vacuum packaging.
5Do not attempt to create your own side seals for a FoodSaver Bag. These bags are manufactured with special side seams which are sealed all the way to the outer edge. Creating your own side seams can actually leave air channels exposed which will cause leakage and prevent a vacuum from being formed.
6Always make sure you leave at least one extra inch of bag material for each time you plan to reuse the bag.
7If you are not sure whether you have achieved a complete seal, simply seal the bag again about 1⁄4 inch above the first seal.
8Bulky items sometimes make it difficult to achieve a smooth sealing surface. Gently stretch the bag flat along the Sealing Strip before closing the lid.
9When packaging products with sharp edges (dry spaghetti, silverware, etc.), protect the bag from punctures by wrapping the products in a cushioning material, such as paper towels, styrofoam, tissue, etc. Products can also be vacuum packaged in canisters or mason jars to avoid any possibility of puncturing
a bag.
10Avoid drawing powdery or
6 | 7 |