EN
Data is collected and displayed approximately every 60 seconds.
VIEW TEMPERATURE AND HUMIDITY AREA
Press SEL to navigate to the Temperature and Humidity Areas.
Temperature data is given at the top; Humidity is below.
•To
•To end
NOTE If you select a sensor that collects only temperature data, the humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
•Press MEM repeatedly to view current, maximum and minimum records for the selected sensor.
•To clear the records, press and hold MEM for 2 seconds. A beep will sound to confirm that the memory has been cleared.
SELECT MEASUREMENT UNIT
Slide the °C / °F switch (inside the clock battery compartment), to the setting you want.
SELECT SENSOR CHANNEL
Press CH to switch between sensors
The house icon shows the selected remote sensor.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the temperature and humidity readings.
TREND | RISING STEADY FALLING |
TEMPERATURE
HUMIDITY
24
BAR916HG_EN_OP.indd 24
5/8/06 11:24:30 AM