AllTrade BAR916HG user manual Alarms, SET Daily Alarm, Set Pre-Alarm

ALARMS

This product has 2 alarms: The Daily Alarm and a Pre-Alarm for snowy weather. The Daily Alarm can be set to go off at the same time every day. The Pre-Alarm sounds only when the Daily Alarm is activated and the recorded temperature from Channel 1 Sensor falls to 2°C (35.6°F) or below.

SET DAILY ALARM

1	Press SEL to navigate to the Clock Area.						will show
	next to the Area.
2.	Press	/		to view the alarm. (AL will show at
	the top.)
3.	Press and hold			/	for 2 seconds.
4.	Select the hour and minute. Press					or	to change
	settings.
5.	Press	/	to confirm.

6.The Daily Alarm icon will appear when the alarm is set.

SET PRE-ALARM

The Pre-Alarm can be set to sound 15, 30, 45, or 60 minutes before the Daily Alarm. It will sound whenever the recorded temperature from Channel 1 Sensor falls to 2°C (35.6°F) or below.

BAR916HG_EN_OP.indd 19

For example, if you set the alarm to 7:00 AM, and the	EN
Pre-Alarm to 45 minutes, the Pre-Alarm will sound at
6:15 AM provided the outdoor temperature at Channel
1 Sensor is 2°C or below.

1. Set up and activate the Daily Alarm.

2.	Press	/	to switch to Pre-Alarm view. (PRE-AL
	will show at the top.)
3.	Press and hold /			for 2 seconds.
4.	Press	or	to select 15, 30, 45 or 60 minutes. This
	is the amount of time the Pre-Alarm will sound
	BEFORE the Daily Alarm. The Pre-Alarm is
	automatically activated when you select a time.
5.	Press	/	to confirm.

shows when the Pre-Alarm is set.

NOTE The Daily Alarm will NOT function until the next day if the Pre-Alarm has been triggered. Also, if you deactivate the Daily Alarm, the Pre-Alarm is automatically deactivated.

19

5/8/06 11:23:55 AM