Neumann.Berlin D1761 manual Notational conventions, Additional information

Page 11

Mainboard D1761

Your mainboard is available in different configuration levels. Depending on the configuration chosen, some of the hardware components described may not be available on your mainboard.

Additional information

Information on the BIOS Setup and additional descriptions of the drivers are contained:

in the readme files on your hard disk

on the driver floppy disks included

on the CD "Drivers & Utilities Collection" or "Drivers & Utilities" or "ServerStart".

The programme Acrobat Reader must be installed to be able to open the manuals. You will i find the programme on the CD-ROM directory: utls/acrobat.

For more details please read the according readme.txt files.

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:

indicates information which is important for your health or for preventing physical ! damage.

i

indicates additional information which is required to use the system properly.

Text which follows this symbol describes activities that must be performed in the order shown. This symbol indicates that you must press the Enter key.

Text in this typeface indicates screen outputs.

Text in this bold typeface indicates the entries you make via the keyboard. Text in italics indicates commands or menu items.

"Quotation marks" indicate names of chapters or terms.

A26361-D1761-Z120-1-6319

English - 1

Image 11 Contents
Deutsch / English / Français AnswersSie haben Page Bestell-Nr./Order No. A26361-D1761-Z120-1-6319 Ausgabe November 2003 November 2003 edition Mainboard D1761Page Übersicht/Overview Mainboard D1761 Externe Anschlüsse / External connectorsPage Contents Page Additional information Notational conventionsInformation about boards Important notesSpecial Onboard features List of featuresOnboard features External ports Internal portsSpecial features Installation Brief instructions on installing mainboardPrior to installation Brief instructions on installing mainboard Driver installationExternal ports Interfaces and connectorsLAN connector Audio front panel Internal ports and connectorsOr 6-channel audio mode via analogue audio channels Hard disk connectionAnalogue 4-channel audio output Using external audio connectionsSelecting settings for 2, 4 or 6-channel audio mode Analogue 2-channel audio outputCD audio input Pin assignment of internal portsFront panel Fan 1 CPU Fan 2 AUX1 Audio front panelUSB dual channel Floppy interface ATA interface Additional power supply ATX12 Power supply ATXRecovering System Bios pinpair B Settings with switches and jumpersSetting via control-panel plug connector Skipping system and Bios Setup password pinpair aReplacing processor Removing and installing processorsTechnical data Add-on modules / UpgradingMounting heat sink Upgrading main memory Installing a memory moduleRemoving a memory module Monofunctional expansions cards Upgrading AGP screen controllersAdding PCI cards PCI bus interrupts Selecting correct PCI slotAdding PCI cards SMBus Audio ModemReplacing the lithium battery Bios update under Windows with DeskFlash utility Bios updateBios Recovery Recovering System Bios When should a Bios update be carried out?When should a microcode update be carried out? Microcode UpdateWhat is a microcode update? Drivers DriversMainboard current requirement AnnexElectrical Properties Loadability for connections and fusesLED APM and Acpi system status, energy-saving modesMainboard Revision Mainboard Revision and Bios VersionBios version Bios update for installed CPU failed Error messagesError messages Monitor type does not match Cmos RUN Setup System battery is dead Replace and run Setup Glossary