Settings with switches and jumpers
Setting via control-panel plug connector
|
| Pin pair A inserted = | |
A | 1 | Skipping system and BIOS Setup password | |
2 | Pin pair B inserted = | ||
| |||
|
| ||
B | 1 | System BIOS recovery | |
Pin pair C inserted = | |||
2 | |||
| |||
| 1 | factory setting | |
C |
| ||
2 |
| ||
i | Please pay attention on the exact position of the pin pairs! | ||
Skipping system and BIOS Setup password - pinpair A
Pinpair A enables skipping the system and BIOS Setup password.
On / inserted System and BIOS Setup password are skipped when the device is switched on and may be changed.
Off / not inserted
System and BIOS Setup password must be entered when the device is switched on.
Recovering System BIOS - pinpair B
Pinpair B enables recovery of the old system BIOS after an attempt to update has failed. To restore the old BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter).
On / inserted The System BIOS executes from floppy drive A: and the inserted
Off / not inserted
Normal operation (default setting).
16 - English |