Neumann.Berlin D1761 manual Drivers

Page 36

Drivers

Microcode update under DOS with bootable microcode update floppy disk - brief description

►Download the update file from out website to your PC.

►Insert an empty floppy disk (1.44 Mbyte).

►Run the update file under DOS (e.g. 1761101.EXE).

►A bootable update floppy disk is created. Leave the floppy disk in the drive.

►Restart the PC.

►Follow the instructions on screen.

To determine whether the latest microcode update has been loaded, the so-called Patch-ID of the processor can be read out.

►Press the F1 key in the BIOS Setup.

The entry CPU / Patch ID is shown on the displayed information page.

A list with the current processors and the related Patch-IDs is available on the Internet.

i	If the processor is not recognised, you also require the microcode update tool for
	processors of the P6 family.

Drivers

Only when no drivers are installed on your system, or you want to update these, proceed as follows:

►Insert the CD "Drivers & Utilities Collection" into the CD-ROM drive.

►If the CD does not start automatically, run the START.EXE programme in the main directory of the CD.

►Select DeskUpdate - Fully automatic installation.

►Follow the instructions on screen.

26 - English

A26361-D1761-Z120-1-6319

Image 36

Contents

Answers Deutsch / English / FrançaisSie haben Page Bestell-Nr./Order No. A26361-D1761-Z120-1-6319 Mainboard D1761 Ausgabe November 2003 November 2003 editionPage Externe Anschlüsse / External connectors Übersicht/Overview Mainboard D1761Page Contents Page Notational conventions Additional informationImportant notes Information about boardsList of features Onboard featuresSpecial Onboard features Internal ports External portsSpecial features Brief instructions on installing mainboard Prior to installationInstallation Driver installation Brief instructions on installing mainboardInterfaces and connectors LAN connectorExternal ports Internal ports and connectors Or 6-channel audio mode via analogue audio channelsHard disk connection Audio front panelUsing external audio connections Selecting settings for 2, 4 or 6-channel audio modeAnalogue 2-channel audio output Analogue 4-channel audio outputPin assignment of internal ports Front panelCD audio input Audio front panel USB dual channelFan 1 CPU Fan 2 AUX1 Floppy interface ATA interface Power supply ATX Additional power supply ATX12Settings with switches and jumpers Setting via control-panel plug connectorSkipping system and Bios Setup password pinpair a Recovering System Bios pinpair BRemoving and installing processors Technical dataAdd-on modules / Upgrading Replacing processorMounting heat sink Installing a memory module Upgrading main memoryRemoving a memory module Upgrading AGP screen controllers Adding PCI cardsPCI bus interrupts Selecting correct PCI slot Monofunctional expansions cards SMBus Audio Modem Adding PCI cardsReplacing the lithium battery Bios update Bios Recovery Recovering System BiosWhen should a Bios update be carried out? Bios update under Windows with DeskFlash utilityMicrocode Update What is a microcode update?When should a microcode update be carried out? Drivers DriversAnnex Electrical PropertiesLoadability for connections and fuses Mainboard current requirementAPM and Acpi system status, energy-saving modes LEDMainboard Revision and Bios Version Bios versionMainboard Revision Error messages Bios update for installed CPU failedError messages Monitor type does not match Cmos RUN Setup System battery is dead Replace and run Setup Glossary