Neumann.Berlin D1761 manual Driver installation, Brief instructions on installing mainboard

Page 17

Brief instructions on installing mainboard

► Should no suitable connection field be provided in the case, then you must install the connection field (1) provided.

Ensure the plate is aligned properly so that the connections are suitable for the mainboard later.

► Set the mainboard on the edge on which the connection field is located (2) and then insert the board in the

case (3).

Make sure that spacers in the housing are only mounted at points at which there are mounting holes in the mainboard.

► Fasten the mainboard with the screws.

Connect the plugs for the power supply, control panel and drives to the corresponding connections on the mainboard.

Driver installation

Install the drivers for the chipset. You may find the driver on the "Drivers & Utilities" CD. Please refer to chapter "Drivers" for a description of installing drivers.

A26361-D1761-Z120-1-6319

English - 7

Image 17
Contents Deutsch / English / Français AnswersSie haben Page Bestell-Nr./Order No. A26361-D1761-Z120-1-6319 Ausgabe November 2003 November 2003 edition Mainboard D1761Page Übersicht/Overview Mainboard D1761 Externe Anschlüsse / External connectorsPage Contents Page Additional information Notational conventionsInformation about boards Important notesSpecial Onboard features List of featuresOnboard features External ports Internal portsSpecial features Installation Brief instructions on installing mainboardPrior to installation Brief instructions on installing mainboard Driver installationExternal ports Interfaces and connectorsLAN connector Or 6-channel audio mode via analogue audio channels Internal ports and connectorsHard disk connection Audio front panelSelecting settings for 2, 4 or 6-channel audio mode Using external audio connectionsAnalogue 2-channel audio output Analogue 4-channel audio outputCD audio input Pin assignment of internal portsFront panel Fan 1 CPU Fan 2 AUX1 Audio front panelUSB dual channel Floppy interface ATA interface Additional power supply ATX12 Power supply ATXSetting via control-panel plug connector Settings with switches and jumpersSkipping system and Bios Setup password pinpair a Recovering System Bios pinpair BTechnical data Removing and installing processorsAdd-on modules / Upgrading Replacing processorMounting heat sink Upgrading main memory Installing a memory moduleRemoving a memory module Adding PCI cards Upgrading AGP screen controllersPCI bus interrupts Selecting correct PCI slot Monofunctional expansions cardsAdding PCI cards SMBus Audio ModemReplacing the lithium battery Bios Recovery Recovering System Bios Bios updateWhen should a Bios update be carried out? Bios update under Windows with DeskFlash utilityWhen should a microcode update be carried out? Microcode UpdateWhat is a microcode update? Drivers DriversElectrical Properties AnnexLoadability for connections and fuses Mainboard current requirementLED APM and Acpi system status, energy-saving modesMainboard Revision Mainboard Revision and Bios VersionBios version Bios update for installed CPU failed Error messagesError messages Monitor type does not match Cmos RUN Setup System battery is dead Replace and run Setup Glossary

D1761 specifications

The Neumann.Berlin D1761 is a cutting-edge microphone designed to deliver pristine audio quality and unparalleled performance. Renowned for its exceptional build and advanced technology, the D1761 is a versatile tool that caters to both studio recording and live sound applications.

One of the standout features of the D1761 is its large diaphragm design. This configuration allows for extended frequency response and increased sensitivity, capturing subtle nuances in vocal performances and musical instruments. The microphone's cardioid polar pattern ensures focused sound capture from the front, effectively minimizing background noise and room reflections, making it an ideal choice for professional recording environments.

Incorporating Neumann's proprietary K67 capsule, the D1761 excels in vocal clarity and warmth. The capsule is meticulously tuned to provide a balanced frequency response that enhances both high and low frequencies, ensuring that recordings retain their natural characteristics. This technological advancement not only improves intelligibility but also adds a distinct character to the sound, which is highly sought after by audio engineers and musicians alike.

Another notable characteristic of the D1761 is its robust construction. Built with high-quality materials, the microphone is designed to withstand the rigors of frequent use while maintaining consistent performance. The durable yet lightweight design makes it suitable for both studio sessions and live performances, providing reliability and longevity.

The D1761 also features an integrated low-cut filter and a -10 dB pad, offering versatility in different recording situations. The low-cut filter helps reduce unwanted low-frequency noise, allowing for cleaner sound capture, while the pad enables the microphone to handle high sound pressure levels without distortion. This adaptability enhances its usability across various applications, from vocals to amplified instruments.

Additionally, the microphone boasts a sleek and modern aesthetic, making it not only a functional piece of equipment but also an attractive addition to any studio setup. With its combination of innovation and elegance, the Neumann.Berlin D1761 stands as a testament to Neumann's commitment to excellence in the audio industry.

Overall, the D1761 microphone encapsulates the perfect blend of technology, design, and sound quality. Whether used in a professional studio or on stage, it delivers the exceptional performance that is synonymous with the Neumann brand, making it a favorite among audiophiles and professionals worldwide.