Neumann.Berlin D1761 manual Add-on modules / Upgrading, Replacing processor, Technical data

Page 27

Add-on modules / Upgrading

Exit energy-saving mode, switch off the system and remove the power plug from the ! mains outlet, before carrying out any of the procedures described in this chapter!

Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI extension boards) are still supplied with power.

Replacing processor

Technical data

Pentium 4 with 400/533/800 MHz Front Side Bus (FSB) in the mPGA478 design.

Celeron with 400 MHz Processor System Bus in the mPGA478 design

A current list of the processors supported by this mainboard is available on the Internet at:

www.fujitsu-siemens.com/mainboards.

Removing and installing processors

Remove the fan that there may be and the heat sink.

3

2

4

5

1

 

 

 

 

 

 

A

Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).

Remove the old processor from the socket (3).

Insert the new processor in the socket so that the angled corner of the processor matches the coding on the socket (A) with regard to the position (4).

The angled corner of the processor can also be at a different location than shown in the i illustration.

Push the lever back down until it clicks into place (5).

A26361-D1761-Z120-1-6319

English - 17

Image 27
Contents Deutsch / English / Français AnswersSie haben Page Bestell-Nr./Order No. A26361-D1761-Z120-1-6319 Ausgabe November 2003 November 2003 edition Mainboard D1761Page Übersicht/Overview Mainboard D1761 Externe Anschlüsse / External connectorsPage Contents Page Additional information Notational conventionsInformation about boards Important notesList of features Onboard featuresSpecial Onboard features External ports Internal portsSpecial features Brief instructions on installing mainboard Prior to installationInstallation Brief instructions on installing mainboard Driver installationInterfaces and connectors LAN connectorExternal ports Audio front panel Internal ports and connectorsOr 6-channel audio mode via analogue audio channels Hard disk connectionAnalogue 4-channel audio output Using external audio connectionsSelecting settings for 2, 4 or 6-channel audio mode Analogue 2-channel audio outputPin assignment of internal ports Front panelCD audio input Audio front panel USB dual channelFan 1 CPU Fan 2 AUX1 Floppy interface ATA interface Additional power supply ATX12 Power supply ATXRecovering System Bios pinpair B Settings with switches and jumpersSetting via control-panel plug connector Skipping system and Bios Setup password pinpair aReplacing processor Removing and installing processorsTechnical data Add-on modules / UpgradingMounting heat sink Upgrading main memory Installing a memory moduleRemoving a memory module Monofunctional expansions cards Upgrading AGP screen controllersAdding PCI cards PCI bus interrupts Selecting correct PCI slotAdding PCI cards SMBus Audio ModemReplacing the lithium battery Bios update under Windows with DeskFlash utility Bios updateBios Recovery Recovering System Bios When should a Bios update be carried out?Microcode Update What is a microcode update?When should a microcode update be carried out? Drivers DriversMainboard current requirement AnnexElectrical Properties Loadability for connections and fusesLED APM and Acpi system status, energy-saving modesMainboard Revision and Bios Version Bios versionMainboard Revision Bios update for installed CPU failed Error messagesError messages Monitor type does not match Cmos RUN Setup System battery is dead Replace and run Setup Glossary

D1761 specifications

The Neumann.Berlin D1761 is a cutting-edge microphone designed to deliver pristine audio quality and unparalleled performance. Renowned for its exceptional build and advanced technology, the D1761 is a versatile tool that caters to both studio recording and live sound applications.

One of the standout features of the D1761 is its large diaphragm design. This configuration allows for extended frequency response and increased sensitivity, capturing subtle nuances in vocal performances and musical instruments. The microphone's cardioid polar pattern ensures focused sound capture from the front, effectively minimizing background noise and room reflections, making it an ideal choice for professional recording environments.

Incorporating Neumann's proprietary K67 capsule, the D1761 excels in vocal clarity and warmth. The capsule is meticulously tuned to provide a balanced frequency response that enhances both high and low frequencies, ensuring that recordings retain their natural characteristics. This technological advancement not only improves intelligibility but also adds a distinct character to the sound, which is highly sought after by audio engineers and musicians alike.

Another notable characteristic of the D1761 is its robust construction. Built with high-quality materials, the microphone is designed to withstand the rigors of frequent use while maintaining consistent performance. The durable yet lightweight design makes it suitable for both studio sessions and live performances, providing reliability and longevity.

The D1761 also features an integrated low-cut filter and a -10 dB pad, offering versatility in different recording situations. The low-cut filter helps reduce unwanted low-frequency noise, allowing for cleaner sound capture, while the pad enables the microphone to handle high sound pressure levels without distortion. This adaptability enhances its usability across various applications, from vocals to amplified instruments.

Additionally, the microphone boasts a sleek and modern aesthetic, making it not only a functional piece of equipment but also an attractive addition to any studio setup. With its combination of innovation and elegance, the Neumann.Berlin D1761 stands as a testament to Neumann's commitment to excellence in the audio industry.

Overall, the D1761 microphone encapsulates the perfect blend of technology, design, and sound quality. Whether used in a professional studio or on stage, it delivers the exceptional performance that is synonymous with the Neumann brand, making it a favorite among audiophiles and professionals worldwide.