Nespresso EF 474, EF 473 manual Replacing compact brewing unit CBU

Repair

Replacing compact brewing unit (CBU)

Tools:

-Torx screwdrivers T10, T20

-Blade screwdriver no. 4

-Oval screwdriver

-Long-nose pliers

-Torque wrench

Procedure:

1.	Remove water tank (33) and drip tray (8)
	together with drip grid (7) and capsule
	container (6).
2.	Place machine on the repairing/service
	holder device (see page 32).
3.	Remove 4 screws (2) on the bottom of the
	machine.
4.	Swing out (EF 473) or snap out (EF 474)
	and remove both side panels (5).
5.	Remove 2 screws (36) and pull off closing
	handle (37).
6.	Remove 2 screws (23) at the front and 1
	screw (23) at the back to detach cover (35).
7.	Unlatch coffee outlet (3) from compact
	brewing unit (34) with a blade screwdriver.
8.	Remove 4 screws (23) and detach

			33
		23
				2
	36	34
	35
	23		7+8+6	5
37		15
	23		36
		14+32
	23
		3

compact brewing unit (34).

9. Remove clip (14) and hose (32) with o-ring

(15) from compact brewing unit (34).

Service Manual EF 473 / EF 474

10.Assemble new compact brewing unit together with new coffee outlet (3) in reverse sequence.

Replace o-ring (15).

22

)Tighten new (EFR nr. 39256) closing handle screws (36) with a torque of 450 N/cm.

Version 1.0 en