Set-up & how to brew

1.Place Brewer upright on a flat surface, remove protective sheet and plug into outlet.

2.DO NOT remove or puncture the foil lid of the K-Cup®portion pack.

3.Lift front facing of the brewer to insert a K-Cup.

4.Place chosen K–Cup into the K-Cup Assembly Housing.

CAUTION: There are two sharp needles that puncture the K-Cup, one above the K-Cup Holder and the other in the bottom of the K-Cup Holder. To avoid risk of injury, do not put your fingers in the K-Cup Housing Assembly.

5.Lower the front facing completely and firmly to close the Lid and puncture the K-Cup portion pack.

6.Depress the water marking button and the hot water tank will open automatically.

7.Fill the Hot Water tank with filtered or bottled water up to the FILL LEVEL indicator.

8.Close the Hot Water Tank cover.