Moyer Diebel 301HT technical manual Detergent, Rinse AID

Page 11

INSTALLATION

INSTALLATION (CONT.)

PLUMBING CONNECTIONS (CONT.)

Drain Connections

1.Drain hose must be supported by bracket provided (shipped inside of machine).

2.The drain hose bracket must be mounted a minimum of 2 feet above the finished drain, either on the rear of the machine or on the wall.

3.The maximum height of the drain from the floor must not exceed 3 feet.

4.Connect the 3/4"I.D. flexible reinforced drain hose to a 1-1/2" wye (Y) drain fitting. Use a 3/4" hose adapter (supplied by others). Do not connect drain hose to a 90° drain fitting.

DETERGENT

The machine is equipped with an automatic detergent dispensing pump system.

1.Use a qualified detergent/chemical supplier for your detergent and rinse aid needs.

2.Your machine is supplied with a detergent dispensing pump that is internally wired and ready for use. Use a commercial grade liquid detergent and insert the red pickup tube into the detergent container. The pickup tube has a strainer on the end to prevent the crystallized chemical from clogging the supply lines.

CAUTION:

!Always wash the hands under running water if they come into contact with the detergent and comply with the specific instructions pertaining to the specific type of detergent.

NOTE:

A nonchlorinated detergent is recommended for your dishwasher.

To prime the peristaltic pump:

1.Insert pump inlet hose into the detergent container.

2.Close machine door and switch machine on.

3.Allow wash tank to fill and run machine cycles until chemical enters machine.

RINSE AID

1.Use a qualified/chemical supplier for your rinse aid needs.

2.Insert the transparent tube into the container containing the rinsing agent.

3.Prime the rinse aid pump while machine is in cycle by pressing and depressing power button until the transparent tube has completely filled.

3.Start the machine as described the "OPERATION SUMMARY" on page 5. The dispenser will pump about 3cc of liquid from the container.

3

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Technical Manual Complete the information below for quick reference Revision Record Revision Record Cont.’ Limited Warranty Foreword Table of Contents ThisPage Intentionally Left Blank Unpacking GeneralPlumbing Connections Electrical ConnectionsRinse AID DetergentCompleting the Installation Operation Summary Operation ProceduresOperations MaintenanceCleaning Schedule MaintenanceAs Required Cleaning Schedule Deliming Condition Cause SolutionCondition Cause Solution This Intentionally Left Blank Replacement Parts Hood and Tank Part Item No Part Description Qty Hood and TankDoor Assembly Door Assembly Wash and Rinse Arms Wash and Rinse Arms Tank Components Tank Components Rinse Aid Dispenser Part Item No Part Description Rinse AID DispenserDrain Assembly Drain Assmebly Wash and Rinse Piping Hardware for Mounting Pump Wash and Rinse PipingPump Assembly Pump Assembly Booster Assembly Booster Assmebly Fill Piping Assembly Fill Piping Assembly Control Panel Prior to S/N 54256 & After S/N Prior to 54256 & After S/N Control PanelControl Panel S/N Range 54256 to S/N Range 54257 to Control Cabinet Control Cabinet ThisPage Intentionally Left Blank Part Electrical Schematics 0510637 Threephase Replacement Parts

301HT specifications

The Moyer Diebel 301HT is a high-performance commercial dishwasher, known for its reliability, efficiency, and innovative features. This machine is specially designed for high-volume establishments such as restaurants, hotels, and cafeterias, where the demand for clean dishes and utensils is relentless.

One of the standout features of the 301HT is its impressive washing capacity. The machine has the ability to clean up to 20 racks per hour, which translates to roughly 720 dishes, making it ideal for busy kitchen operations. This speed does not compromise on cleanliness, as the dishwasher's powerful wash system ensures that every load comes out sparkling clean.

The 301HT incorporates advanced technology to enhance its cleaning efficiency. Equipped with a dual rinse system, it offers a thorough rinse that removes any detergent residue, ensuring that dishes are perfectly clean and safe for use. The machine utilizes a high-temperature wash cycle, achieving optimal sanitation standards, which is crucial in the foodservice industry.

Energy efficiency is another critical characteristic of the Moyer Diebel 301HT. This model is designed to consume less water and energy compared to traditional dishwashers, contributing to lower operational costs over time. Its efficient design allows for reduced water usage without compromising performance, making it an eco-friendly choice for businesses striving to minimize their environmental footprint.

The 301HT is built with durability and ease of use in mind. Its stainless steel construction not only offers a sleek appearance but also ensures resistance to corrosion and wear. The ergonomic design features an easy-to-use control panel, allowing staff to operate the machine without extensive training. Additionally, its low-maintenance design helps to reduce downtime, keeping the workflow smooth and efficient.

Safety features are integrated into the Moyer Diebel 301HT, including a built-in automatic rinse aid dispenser that ensures consistent performance while minimizing the risk of user error. This focus on safety makes the machine a preferred choice for busy kitchens where employee training time may be limited.

In summary, the Moyer Diebel 301HT is a top-of-the-line commercial dishwasher that combines speed, efficiency, and reliability. Its high capacity, advanced washing technology, energy-efficient design, and robust construction make it an essential asset for any high-volume food service operation. With its commitment to cleanliness and safety, the 301HT stands out as a leading choice among commercial dishwashers on the market today.
Top Page Image Contents