D I P A N D F L O W C O O L E R S U S E R ’ S M A N U A L
Siting Considerations
All the units are air cooled, air being pulled in through the front and expelled from the rear. The ventilation grilles should never be obstructed, therefore, as this will detract from the performance. Also the fridge units should never be situated in an enclosed space or near an extractor fan, this too will detract from the performance.
MINIMUM 150 mm (6")
MINIMUM 150 mm (6")
Setting up the unit
1.Check the voltage marked on the unit’s rating plate against that of the mains supply. Connect the mains cable to a suitable plug as in the following table. Note that the unit must be earthed to ensure proper electrical safety.
Connections | 230V | 110/120V |
Live | brown | black |
Neutral | blue | white |
Earth | yellow and green | green |
|
|
|
If a fused plug is used it should be fitted with the following value fuse:
Supply | 230V |
|
|
Fuse Rating | 13 Amp |
|
|
Note that units marked 230V on the rating plate work equally well at 220V; units marked 120V on the rating plate work equally well at 110V
P A G E 11