D I P A N D F L O W C O O L E R S U S E R ’ S M A N U A L
Carrying a Dip Cooler
A support clip is provided which should be fixed to the side of the unit if it is required to move the unit frequently. It not only makes it easier to carry it also protects the flexible hose. The support clip consists of a block and a long screw. To fit it to the Cooler, remove the screw in the cover at the rear on the opposite corner to the coil, the long screw goes through the block and replaces the screw just removed. There is a lip on the block which should fit over the edge of the cover to give the support stability. The coil is then clipped into the support for ease of carrying.
Cleaning your unit
Before cleaning your unit, disconnect from the power supply and allow to cool to ambient temperature.
You can clean the case of the refrigerated unit with a cloth dipped in water or ethanol (methanol or formaldehyde can also be used). No part of the case or cover should be immersed in the solvents.
Do not use acetone or abrasive cleaners.
Packing
When you receive your unit, make sure you keep the original packing in case you ever need to return it for service or repair.
The unit must be transported in the original packing to avoid damage. Techne accepts no responsibility for damage incurred unless the unit is correctly packed and transported in this way.
P A G E 14