Cannon Professional Care and Cleaning, Heat Clean Liners, Cleaning the Griddle Plate

Page 23

CARE AND CLEANING

!Never use steam cleaners or pressure cleaners on the appliance.

!Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack.

!The accessories can be washed like averyday crockery (even in your dishwasher).

!Switch off the electricity supply and allow to cool before cleaning the cooker.

!Clean the cooker regularly and wipe up spills soon after they occur to prevent them from becoming burnt on. Never use biological washing powder, caustic cleaners, harsh abrasives, scouring pads, steam cleaners, aerosol cleaners or oven chemical cleaners of any kind.

!Before moving your cooker ensure that it is cool and note that it is heavy so you may require assistance. The cooker is fitted with rear wheels and will slide in and out of position easily. Movement of your cooker is most easily achieved as follows:

Open the grill/oven door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding contact with any grill or oven furniture and then lift and slide at the same time.

When repositioning the cooker, ensure that it is level. Take care to ensure that any floor covering is not damaged.

'HEAT CLEAN' LINERS

The oven linings are coated with a special enamel which has a continuous cleaning action. The higher the oven temperature the more effective the action. In most cases this cleaning operation will proceed during normal cooking.

However, if high temperatures are not used regularly it may be necessary to run the oven empty at maximum setting for one hour. If desired, they can be wiped over with a soapy cloth followed by a wipe with a clean, damp cloth.

CLEANING THE GRIDDLE PLATE

After cooking, leave the griddle plate on the hob and allow to cool before cleaning. It can then be taken to the sink and washed using warm soapy water, gently wipe the cooking surface with a dishcloth. DO NOT use abrasive cleaning materials.

REPLACEMENT OF OVEN LIGHT BULB

CAUTION: DISCONNECT THE APPLIANCE FROM THE ELECTRICITY SUPPLY BEFORE REPLACING THE LAMP TO AVOID THE POSSIBILITY OF AN ELECTRIC SHOCK.

Light bulbs are not covered by the manufacturer's guarantee.

A new 15W, 300°C rated SES bulb can be obtained from your cooker supplier or any major electrical retailer.

1. Remove the shelves from the oven.

2. Unscrew the lens using a thick cloth to protect your fingers in the unlikely event of a lens fracture.

3. Unscrew bulb.

4. Fit new bulb and refit lens.

23

Image 23
Contents Freestanding GAS Cooker Contents Introduction Be Kept Away ForyoursafetyAlways While Cooking NeverGuidance on Automatic Cooking OventimeroperationAutomatic Cooking Clockface Timer Function ButtonsSymbols Auto Cooking ProgrammeSetting the Minute Minder Setting the Time of DAYOT1 Auto Cooking ProgrammesOventimeroperation Other Notes on Timer Operation Oval Burners HotplateTo USE the Hotplate HOW to Deal with a FAT Fire Safety Requirements for Deep FAT FryingUSE of the Griddle GriddlePotato Cakes Method SomerecipeideasforyourgriddleDropped Scones Method Welsh Cakes MethodTo USE the Grill GrillShelf Position Food Ovens Meat and Poultry Oven Cooking ChartYeast Mixtures Preparing Food for Slow Cooking ‘SLOW COOK’ SettingWarming Compartment Replacement of Oven Light Bulb Care and CleaningHeat Clean Liners Cleaning the Griddle PlateCooker Finish Cleaning Method Something Wrong With Your Cooker Problem CheckDisposal of your product Provision for Ventilation Installation InstructionsGAS Safety Installation & USE Regulations LocationGeneral Technical Data DimensionsCooker Hoods Space for FixingStability Bracket Unpacking the CookerLevelling 750 Green and Yellow Earth Blue Electrical ConnectionIf the Fitted Plug is Removed If a Moulded Plug is FittedInstallation & Operational Checks Page Guarantee After Sales Service