Bretford FP42ULC manual Install door stop to bottom shelf using screws CC and nuts DD, Step

Page 6

Install door stop to bottom shelf using screws (CC) and nuts (DD).

STEP 6

Install door stop to bottom shelf using screws (CC) and nuts (DD).

CC	DD

STEP 7

Attach a handle to each door with screws (EE). Then install each door between the middle and bottom

shelves with screws (FF). NOTE: Adjustments to the door stop may need to be done.

FF

EE

6

Image 6

Contents FP42ULC FP42MULC PARTS LISTHARDWARE LIST FLAT PANEL CABINET CART WITH OR WITHOUT A PULL OUT SHELFSTEP AA BBBRACKET TO THE INSIDE INSTALL HARDWARE TO TOP SHELF CORNER ONLY, OMIT HANDLE SIDE AA BB Slide on middle shelf Slide on bottom shelf Slide on front legs AA BBInstall handle to either side of the cart using bolts GG and nuts BB Secure tube and top shelf together using screws HH and nuts HHSide Panel AA BB INSTALL HARDWARE TO EACH CORNER AA BB Rear Panel NOW TIGHTEN ALL CART CORNER HARDWAREInstall door stop to bottom shelf using screws CC and nuts DD JJ KK SKIP TO STEP 15 IF YOUR CART DOES NOT HAVE A SHELF STEP CUTOUT A CUTOUT BExtend the slides to the positioning shown CUTOUT TAB TABTOP BOTTOM driver bit provided LL CENTER MONITOR HORIZONTALLY THEN SECURE031-8691 Rev. 05.11.11 CZ