Bretford FP42ULC manual Extend the slides to the positioning shown, Step

Page 9

Extend the slides to the positioning shown.

STEP 12

Install each inner slide into the outer slides. NOTE: Push inner slide in all the way until it snaps in.

STEP 13

Extend the slides to the positioning shown.

9

Image 9

Contents HARDWARE LIST PARTS LISTFP42ULC FP42MULC FLAT PANEL CABINET CART WITH OR WITHOUT A PULL OUT SHELFSTEP AA BBBRACKET TO THE INSIDE Slide on middle shelf Slide on bottom shelf Slide on front legs AA BB INSTALL HARDWARE TO TOP SHELF CORNER ONLY, OMIT HANDLE SIDE AA BBSecure tube and top shelf together using screws HH and nuts HH Install handle to either side of the cart using bolts GG and nuts BBNOW TIGHTEN ALL CART CORNER HARDWARE Side Panel AA BB INSTALL HARDWARE TO EACH CORNER AA BB Rear PanelInstall door stop to bottom shelf using screws CC and nuts DD JJ KK CUTOUT A CUTOUT B SKIP TO STEP 15 IF YOUR CART DOES NOT HAVE A SHELF STEPExtend the slides to the positioning shown TAB TAB CUTOUTTOP BOTTOM driver bit provided LL CENTER MONITOR HORIZONTALLY THEN SECURE031-8691 Rev. 05.11.11 CZ