Bretford FP42ULC manual driver bit provided LL, Center Monitor Horizontally Then Secure, Step

Page 12

driver bit provided.

STEP 17

Attach the stop brackets to the hook bars as shown with security screws (LL) using the

driver bit provided.

LL

STEP 18

Center your monitor horizontally and then tighten in place with screws (MM).

MM

CENTER MONITOR HORIZONTALLY THEN SECURE

Part # 031-8691

Rev. 05.11.11 CZ 12

Image 12

Contents PARTS LIST HARDWARE LISTFP42ULC FP42MULC FLAT PANEL CABINET CART WITH OR WITHOUT A PULL OUT SHELFSTEP AA BBBRACKET TO THE INSIDE INSTALL HARDWARE TO TOP SHELF CORNER ONLY, OMIT HANDLE SIDE AA BB Slide on middle shelf Slide on bottom shelf Slide on front legs AA BBInstall handle to either side of the cart using bolts GG and nuts BB Secure tube and top shelf together using screws HH and nuts HHSide Panel AA BB INSTALL HARDWARE TO EACH CORNER AA BB Rear Panel NOW TIGHTEN ALL CART CORNER HARDWAREInstall door stop to bottom shelf using screws CC and nuts DD JJ KK SKIP TO STEP 15 IF YOUR CART DOES NOT HAVE A SHELF STEP CUTOUT A CUTOUT BExtend the slides to the positioning shown CUTOUT TAB TABTOP BOTTOM driver bit provided LL CENTER MONITOR HORIZONTALLY THEN SECURE031-8691 Rev. 05.11.11 CZ