Omron CS1W-ETN21 Error LOG Clear, Error Log Data Response, Error Code, Detailed Information

Command/Response Reference Section 7-3

Error Log Data (Response)

Precautions

The specified number of error log records from the beginning record number is returned sequentially. The total number of bytes in the error log is calculated as the number of records x 10 bytes/record. Each error log record thus com- prises 10 bytes, configured as follows:

1st byte				10th byte
	Error code		Detailed Minutes Second Day Hour Year Month
		information

Error Code, Detailed Information

Details of the error stored in the record. Refer to 8-3-1 Error Log Error Codes for details.

Minute, Second, Day, Hour, Year, Month

Indicate the time at which the error stored in the record occurred.

If the error log contains fewer records than the number specified in the num- ber of records parameter, all records stored in the error log at the time the command is executed will be returned and the command executed will end normally.

Response Codes

Response code	Description
0000	Normal
1001	Command too large
1002	Command too small
1103	Beginning record number is out of range
110C	The number of read records is 0.

7-3-8 ERROR LOG CLEAR

Clears the number of records stored in the Ethernet Unit error log.

Command Block

21 03

Command code

Response Block

			21	03
		Command			Response
			code			code
Response Codes
			Response code				Description
	0000						Normal
	1001						Command too large

166