Omron CS1W-ETN21 Web Function Password, Using the Web Function Setting Password, Status Monitor

Ethernet Unit Web Function			Appendix G
Menu item	Parameter item	Corresponding CX-Programmer function
Receive Mail		Unit Setup window- Receive Mail Tab
	Mail Address Protection Setting	Unit Setup window- Receive Mail Tab - Protect using mail address
	Attached File Enable Settings	Unit Setup window- Receive Mail Tab - Receive file with specified extension only
	Command Enable Setting	Unit Setup window- Receive Mail Tab - Receive specified commands only
Status Monitor
Menu item	Corresponding CX-Programmer function
Status View	---
Unit information	FINS(0501): CONTROLLER DATA READ
Unit status	FINS(0601): CONTROLLER STATUS READ
Protocol status	---
IP status	FINS(2762): PROTOCOL STATUS READ, IP status
ICMP status	FINS(2762): PROTOCOL STATUS READ, ICMP status
TCP status	FINS(2762): PROTOCOL STATUS READ, TCP status
UDP status	FINS(2762): PROTOCOL STATUS READ, UDP status
Memory status	FINS(2763): MEMORY STATUS READ
Socket status	FINS(2764): SOCKET STATUS READ
Fins status	Ethernet Unit’s internal node table
Mail log	RECEIVE MAIL: READ MAIL LOG
Error log	FINS(2102): READ ERROR LOG
Send mail status	Mail send status 1 to 8

Web Function Password

To prevent unauthorized access to the Ethernet Unit from a Web browser, password entry is required to enable display and setting of the parameters. Even if the password has not been set, the default password “ETHER- NET” must be entered. To change this password, set a new password in the HTTP Tab of the CX-Program- mer’s Unit Setup, or use the Web function and select Settings - IP address and Protocols - HTTP.

Note 1. Setting a new Web function password as soon as possible is recommended to prevent unauthorized access.

2. The Web function can also be disabled by setting in the Web function option.

Using the Web Function (Setting Password)

The Ethernet Unit’s Web window is displayed by accessing the following URL from the Web browser.

URL: http://(Ethernet Unit’s IP address)/0

Use the following procedure to set the Unit’s system settings (HTTP password setting in this example) using Internet Explorer version 6.0 and the Ethernet Unit’s Web function.

245