257
Revision History
A manual revision code appears as a suffix to the catalog number on the fron t cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code Date Revised content
1 July 2003 Original production
02 March 2004 Information was added for new functions available with new versions of the CX-Programmer
and Ethernet Unit, including the Web function, described in new sub-section 2-8 and Appendix
G. The following revisions were also made.
Page xiv: Added information on unit versions.
Page 3: Added information for CX-Programmer version 4.0 or higher.
Page 7: Corrected “or” to “and” in paragraph on automatic clock adjustment.
Pages 8 and 9: Added information on Ethernet Units with Unit Ver. 1.3 or later.
Page 12: Added information on CX-Programmer version 4.0 or higher.
Page 17: Changed note
Page 25: Corrected information for ERH indicator.
Page 26: Added information on upgrade to unit version.
Page 28: Corrected “00.00.00.00” to “0.0.0.0” in Note 1.
Page 31: Corrected “1.2” to “0.9” and “0.8” to “0.4” in Note.
Page 40: Changed screen.
Page 41: Changed screen, corrected “Right-click” to “Click” in steps 6 and 7, and added new
sub-section on the Web function.
Page 43: Changed screen.
Page 45: Added settings to tables.
Page 47: Added table of settings for HTTP Tab, and swapped “response” and “request” in dia-
gram.
Pages 50 and 58: Changed screen.
Page 59: Added item to table and notes.
Page 60: Corrected “00.00.00.00” to “0.0.0.0” in table.
Page 71: Added information on HTTP Server Setup and changed screen.
Page 84: Changed “07CD hex” to “07C0 hex”
Page 85: Corrected “00.00.00.00” to “0.0.0.0” and corrected information for setting local IP
address.
Page 96: Added information on prohibiting dynamic conversion of remote IP addresses.
Pages 100 and 101: Corrected table headings.
Page 124: Added note.
Page 125: Corrected “Controller Unit” to “Controller Link Unit” in diagram.
Page 126: Corrected “Ethernet Unit” to “Controller Link Unit” in information on relay network
tables, and corrected “2” to “1” for the relay node address.
Pages 141 and 142: Changed “PC” to “PLC.”
Page 197: Removed “(CJ Series only)” from table.
Page 221: Added error codes to table.
Page 229: Added table on TCP status information.
Cat. No. W420-E1-04
Revision code