Omron CS1W-ETN21 UDP Receive Request, Requests that data be sent from a UDP socket, Enobufs

Command/Response Reference		Section 7-3
	Response code	Description
	1002	Command too small
	1100	UDP socket number is out of range.
		Local UDP port number is 0.
	1101	The variable type for the results storage area is out of range.
	1103	Non-zero bit address specified for the results storage area.
	220F	Specified socket is already open or is being closed.
	2211	High traffic at Unit; cannot execute service.
Results Storage Area Response Codes
	Response code	Description
	0000	Normal
	003E	Internal buffer cannot be reserved due to high receive load
		(ENOBUFS).
	0049	Duplicate UDP port number (EADDRINUSE).

7-3-10 UDP RECEIVE REQUEST

Requests that data be sent from a UDP socket.

Command Block

27	02
Command		Results storage area Number		Timeout
code		UDP socket number	of reception	value
			bytes
		Socket option

Response Block

27 02

Command Response

code code

Results Storage Format

			Received bytes
Response	Source IP address Source UDP	Number of	Received data
code	port number	reception
		bytes

Parameters

Socket Option (Command) The socket option specified as 1 byte. The setting is not valid for this com- mand. Set to 0.

UDP Socket Number (Command)

Results Storage Area (Command)

The UDP socket number to receive data specified as 1 byte between 1 and 8.

The area in which the results of the command execution are stored. The first byte specifies the memory area and data type (variable type). The 2nd to 4th bytes specify the beginning address of the results storage area. Refer to page 158 for details about the variable types and addresses that can be spec- ified.

168