Omron CS1W-ETN21 operation manual Connection Information 60 Bytes

Command/Response Reference Section 7-3

#0

#1

#2

#3

#4

#5

#15

#16

#17

#18

4 bytes

Type number	Description
#0	Echo reply
#1, #2	Undefined, always 0
#3	Destination unreachable
#4	Source quench
#5	Routing redirect
#6, #7	Undefined, always 0
#8	Echo
#9, #10	Undefined, always 0
#11	Time exceeded
#12	Parameter problem
#13	Time stamp
#14	Time stamp reply
#15	Information request
#16	Information request reply
#17	Address mask request
#18	Address mask reply

TCP Status (Response) Three types (46 items) of TCP status information occupying 4 bytes each are returned in the following sequence. Each value is returned as an 8-digit hexa- decimal value.

1) Connection Information (60 Bytes)

Fifteen items are returned in the following sequence:

1,2,3... 1. The number of times active connections were correctly established.

2.The number of times a SYN packet was received while waiting to establish a passive connection.

3.The number of times active or passive connections were correctly estab- lished.

4.The number of times an established connection was cut off.

5.The number of times the connection wait status was cut off.

6.The number of times protocol control blocks or other actively allocated structures were released.

7.The number of segments for the round-trip time (time from segment trans- mission to ACK).

8.The number of times the round-trip time was changed.

9.The number of times a delayed acknowledgement (ACK) was sent. If the order of the received segments is reversed, ACK is sent with a packet of data separate from ACK (response to input data, etc.) or is immediately sent with the ACK for other data.

10.The number of times the connection was cut off because no ACK was re- turned after several resend attempts.

11.The number of times no ACK was returned within the resend timer set time. (The resend timer sets the maximum time limit between the data being out- put and ACK being returned.)

191