Omron CS1W-ETN21 operation manual Pop, POP Server Setup

POP Section 3-5

3-5 POP

POP Server Setup

Item	Contents	Default
Server specifi-	Select whether the POP3 server used for receiving	IP Address
cation type	mail is to be specified by IP address or the host's
	domain name (i.e., host name).
IP Address	Set the IP address for the POP3 server used for	0.0.0.0
	receiving mail.
	This setting is enabled only when “IP address” is
	selected as the method for specifying the server.
Host name	Set the host domain name (i.e., the host name) for	None
	the POP3 server that is to be used for receiving
	mail.
	This setting is enabled only when “host name” is
	selected as the method for specifying the server.
Port No.	Set the port to be used for connecting to the POP3	0
	server that is to be used for receiving mail.	(Number 110
	This setting does not normally need to be changed.	is used.)
Account Name	Set the account name to be used for sending and	None
	receiving mail.
	Only alphanumeric characters can be used.
	If no account name is set, the portion of the local e-
	mail address to the left of the @ will be used.
Mail password	Set a password for the account that is to be used	None
	for sending and receiving mail.
Server access	Set the interval for sending and receiving mail. Mail	0
interval time	will be automatically sent and received at the inter-	(5 minutes)
	val set here.

For details, refer to SECTION 3 Mail Receive Function in the Operation Man- ual Construction of Applications.

68