Omron CS1W-ETN21 operation manual Etn, Cpu

Send Mail				Section 3-7
	Item		Contents		Default
	Mail	Soft-	If this option is selected, mail is sent whenever the		Checked
	trigger	ware	Mail Send Switch turns ON.
	type	switch	The Mail Send Switch is bit 03 of word n in the
	(Select
			words allocated for CPU Bus Units. (n = 1500 + 25
	only
			x unit number)
	one.)
		Word	If this option is selected, the value of a specified		Not checked
		value	address is compared with a standard comparison
		change	value using one of the following comparison func-
			tions, and mail is sent whenever the condition is
			satisfied.
			=, <>, <, <=, >=, >
			Select the address for storing the comparison
			value from the drop-down list.
		Bit value	If this option is selected, mail is sent whenever a		Not checked
		change	specified bit turns ON or whenever it turns OFF.
			Select the bit address from the drop-down list
			below.
		ETN	If this option is selected, mail is sent whenever a		Not checked
		condition	new error is stored in the Ethernet Unit's error log.
		CPU	If this option is selected, mail is sent whenever any		Not checked
		condition	of the following conditions occur at the CPU Unit.
			The drop-down list at the right can be used to
			select which of these three are to serve as mail
			triggers.
			• When a non-fatal error occurs
			• When a fatal error occurs
			• When the operating mode is changed
		Interval	If this option is selected, mail is sent at fixed time		Not checked
		time	intervals.
		(Peri-	The time interval (in minutes) can be set in the
		odic
			interval time box.
		timer)
	Mail address		Select the destination mail address.		Address 1
			The mail destination is the one set under the Mail
			Address tab.
	Send user data		If this option is selected, user-created data is sent		Not checked
			in the body of the mail.
			The location for storing the user-created data is
			set by the user-defined mail address setting
			below.
	Send Error Log		If this option is selected, the error log is included in		Not checked
	information		the body of the mail.
	Send status infor-		If this option is selected, status information is		Not checked
	mation		included in the body of the mail.
	Send file data/I/O		If this option is selected, any of the following types		Not checked
	memory data		of data can be sent as file attachments to e-mail.
			• I/O memory data (.IOM)
			• I/O memory data (.TXT)
			• I/O memory data (.CSV)
			• File data (any file)
			Select the type of data to be attached from the
			checkboxes below. If I/O memory data is selected,
			then also select, in “I/O memory data” below, the
			address and range of data to be sent.
	Attached file		If the above setting is checked so that files can be		None
	name		sent as attachments, then specify the name of the
			file that is to be sent.

71