Omron CS1W-ETN21 FINS/TCP Connection Status Read, 2232, Reads the FINS/TCP connection status

	Command/Response Reference		Section 7-3
Response Codes
		Response code	Description
		0000	Normal
		0105	Node address setting error
			Local IP address setting error
		0302	CPU Unit error; execution not possible.
		1001	Command too large
		1002	Command too small
		1100	Connection number not set from 1 to 16
			Remote IP address set to 0
			Remote TCP port number set to 0
		2230	Connection already established with specified remote node
		2231	Specified connection number not set as FINS/TCP client in
			Unit Setup
		2232	Remote node change processing for specified connection
			number aborted because change request received during pro-
			cessing

7-3-20 FINS/TCP CONNECTION STATUS READ

Reads the FINS/TCP connection status.

Command Block

27	31
Command		FINS/TCP
code		connection No.

Response Block

27	31
Command		Response	FINS/TCP	Connection	Local IP address	Local TCP	Remote IP	Remote TCP	TCP transition
code		code	connection	service		port number	address	port number
			No.

Parameters

FIFINS/TCP Connection

No. (Command,

Response)

Command: Specifies, in two bytes, the FINS/TCP connection number (1 to 16) for which the status is to be read.

Response: Specifies the FINS/TCP connection number (1 to 16) for which the status was read.

Connection Service	Specifies the service that is being used for the FINS/TCP connection as a
(Response)	number.
	0003: FINS/TCP server
	0004: FINS/TCP client
Local IP Address	Specifies the IP address for the local node in hexadecimal.
(Response)
Local TCP Port Number	Specifies the TCP port number for the local node.
(Response)
Remote IP Address	Specifies the IP address for the remote node in hexadecimal.
(Response)

183