Omron CS1W-ETN21 operation manual Ethernet Network Parameters, Parameter Value Description

Appendix A

Ethernet Network Parameters

Parameter	Value		Description
TCP send buffer	4,096 bytes		Maximum capacity of the TCP send buffer
TCP receive buffer	4,096 bytes		Maximum capacity of the TCP receive buffer
UDP send buffer	9,000 bytes		Maximum capacity of the UDP send buffer
UDP receive buffer	9,016 bytes		Maximum capacity of the UDP receive buffer
FINS receive buffer	16,383 bytes		Maximum capacity of the FINS receive buffer
RAW send buffer	2,048 bytes		Maximum capacity of the RAW send buffer
RAW receive buffer	2,048 bytes		Maximum capacity of the RAW receive buffer
Hold timer	75 s (12 min max.)		The hold timer is used for active open processing of TCP sockets.
			An ETIMEDOUT error will occur if connection is not completed within
			75 s.
Resend timer	Initial value:	1 s	The resend timer is used to monitor completion of reception of arrival
	Maximum value: 64 s		confirmations when transferring data via socket services, including FTP
			server and mail transfer TCP sockets. If the timer setting is exceeded
			before arrival confirmation is received, data is resent. Resends are per-
			formed from the first timeout (1 s) through the 12th timeout (64 s).
			An ETIMEDOUT error will occur after the 12th timeout.
Continue timer	Initial value:	5 s	The continue timer starts if preparations have been completed to send
	Maximum value: 60 s		data but the send window is too small (either 0 or too small) to send the
			data and the remote node has not requested that communications be
			restarted. Confirmation of the window size is requested from the remote
			node when the continue timer times out. The initial value of the timer is
			5 s and confirmation processing will continue consecutively with increas-
			ingly longer times until the maximum time of 60 s is reached.
2MSL timer	60 s		The 2MSL timer starts at the TCP socket that first closes the socket and
			will run for 60 s in the TIME_WAIT status.
IP reassemble timer	12 s		A fragmented IP packet is discarded if it cannot be reassembled within 12
			seconds.
ARP timer	20 min/3 min		If a complete ARP table entry (with an Ethernet address) is not referred
			to for 20 minutes, it is removed from the table.
			An incomplete ARP table entry (no response yet returned to the ARP
			request) is removed from the table after 3 minutes.
Window size	4,096 bytes		The initial value of the maximum capacity used to control the conver-
(initial value of maxi-			gence of TCP sockets. Actually, the node negotiates with the remote
mum window size)			node and uses the smaller of the values for the two nodes. The window
			size will fluctuate with the available space in the TCP reception buffers of
			the remote node when processing communications.
Fragment size	1,500 bytes		Data packets are fragmented into 1,500-byte IP packets. UDP data is
			separated into 1,472-byte fragments before sending.
Segment size	1,024 bytes		TCP data is separated into 1,024-byte units, unless the segments are dif-
			ferent, in which case it will be separated into 536-byte units.
TTL (Time to Live)	30		Decremented each time an IP router is passed.

231