Omron CS1W-ETN21 operation manual Unit Setup for Particular Applications, Socket Services, Mail

Unit Setup for Particular Applications Section 2-10

The default IP router is selected when no Network ID exists in the IP router table for the destination network number. To set the default IP router, set

0.0.0.0for the IP address and set the default IP router's IP address for the router address.

2-10 Unit Setup for Particular Applications

Aside from the basic settings, the required settings vary depending on the particular communications applications that are used.

For details on settings, refer to SECTION 3 CX-Programmer Unit Setup.

FINS/UDP

CX-Programmer tab	Settings
Setup	Conversion
	FINS/UDP Port No.
	IP Address Table
	Destination IP Address
	Change Dynamically

For details, refer to SECTION 6 FINS Communications Service in the Opera- tion Manual Construction of Networks.

Use CX-Integrator to make routing table settings as required.

FINS/TCP

CX-Programmer tab	Settings
Setup	FINS/TCP Port No.
FINS/TCP	FINS/TCP Connection Setup

For details, refer to SECTION 6 FINS Communications Service in the Opera- tion Manual Construction of Networks.

Use CX-Integrator to make routing table settings as required.

Socket Services

CX-Programmer tab	Setting
Setup	Keep-alive

FTP

CX-Programmer tab	Settings
Setup	Login
	Password
	Port No

For details, refer to SECTION 4 FTP Server Function in the Operation Manual

Construction of Applications.

Mail

CX-Programmer tab	Settings
DNS	IP Address
	Port No.
	Retry timer

50