Omron CS1W-ETN21 operation manual Smtp Server Setup

SMTP Section 3-4

3-4 SMTP

SMTP Server Setup

Item	Contents	Default
Server specifi-	Select whether the SMTP server used for send-	IP Address
cation type	ing mail is to be specified by IP address or the
	host's domain name (i.e., host name).
IP Address	Set the IP address for the SMTP server used for	0.0.0.0
	sending mail.
	This setting is enabled only when “IP address” is
	selected as the method for specifying the server.
Host name	Set the host domain name (i.e., the host name)	None
	for the SMTP server that is to be used for send-
	ing mail.
	This setting is enabled only when “host name” is
	selected as the method for specifying the server.
Port No.	Set the port to be used for connecting to the	0
	SMTP server that is to be used for sending mail.	(No. 25 is used.)
	This setting does not normally need to be
	changed.
Local mail	Set the mail address for the Ethernet Unit.	None
address
Use POP before	Select whether or not to use the mail receiving	Not checked
SMTP	method (POP before SMTP) in which the POP
	server must be accessed (to receive mail) before
	the SMTP server is accessed (to send mail).

For details, refer to SECTION 2 Mail Send Function in the Operation Manual

Construction of Applications.

67